Transistor behavior via Au clusters etched from electrodes in an acidic gating solution: Metal nanoparticles mimicking conducting polymers
نویسندگان
چکیده
We report that the electrical conductance between closely spaced gold electrodes in acid solution can be turned from off [insulating; I] to on [conducting; C] to off again by monotonically sweeping a gate voltage applied to the solution. We propose that this ICI transistor action is due to an electrochemical process dependent on nanoparticles etched from the surface of the gold electrodes. These measurements mimic closely the characteristics of nanoscale acid-gated polyaniline transistors, so that researchers should guard against misinterpreting this effect in future molecular-electronics experiments.
منابع مشابه
Seeding approach to noble metal decorated conducting polymer nanofiber network.
Metal displacement reactions between conducting polymers-"synthetic metals"-and noble metals (Pt, Au and Ag) have been demonstrated using a seeding polymerization technique, to produce a synthetic metal nanofiber network decorated with noble metal nanoparticles, in one-step.
متن کاملTop-down shaping of metal nanoparticles in solution: partially etched Au@Pt nanoparticles with unique morphology.
Metallic nanoparticles with a unique morphology were produced by combining bottom-up nucleation/growth and top-down etching for Au core-Pt shell nanoparticles. Interesting optical and electrocatalytic properties were observed for the newly formed shapes.
متن کاملELECTROCHEMICAL BEHAVIOR OF GC, Pt AND Au ELECTRODES MODIFIED WITH THIN FILM OF COBALT HEXACYANOFERRATE
0A thin film of cobalt hexacyanoferrate (CoHCF), an analogue of mixed-valence Prussian blue, was deposited electrochemically on the glassy carbon, platinum and gold electrode surfaces in 0.5M KC1 solution. The electrochemical behavior of these modified electrodes show three couples of redox peaks by CV in a supporting electrolyte solution of 0.5M NaCl, whereas for Au modified electrode only ...
متن کاملImpedance Study of Drinking Water and Tastants Using Conducting Polymer and Metal Electrodes
In this study the sensing capabilities of a combination of metals and conducting polymer electrodes for drinking water and dissolved tastants using an AC-impedance mode in frequency range 10 to 10 Hz at 0.1 V potential has been carried out. Classification of seven different bottled and municipal drinking water samples along with various tastants dissolved in DI water (DI water) for KCl (5mM) (s...
متن کاملElectroanalytical applications of nanocomposites from conducting polymers and metallic nanoparticles prepared by layer-by-layer deposition*
Layer-by-layer (LbL) deposition is a convenient technique for the formation of ultra thin nanocomposite layers containing metallic nanoparticles (NPs) and conducting polymers (CPs). The advantages of this approach for producing composite layers suitable for electroanalytical applications are discussed. Examples of electroanalytical applications of LbL-deposited composites are presented. Composi...
متن کامل