Corrosion Behavior of Copper in the Presence of Proteins
نویسندگان
چکیده
Copper-bearing intrauterine devices(Cu-IUDs) are being increasingly used all over the world. However, the dissolution of copper in the presence of proteins is not well characterized. Here, with open circuit potential, electrochemical impedance spectroscopy measurements and potentiodynamic polarization test, the corrosion behavior of copper samples in different single-protein simulated uterine solutions was researched. Protein increased the corrosion rate of copper.
منابع مشابه
The Effect of Simple Shear Extrusion on the Corrosion Behavior of Copper
In this study, corrosion behavior of copper that was deformed by Simple Shear Extrusion (SSE) method was investigated in 3%wt NaCl solution. Modified Williamson-Hall method, applied on the X-ray diffraction patterns of the samples, showed that increase in the number of SSE passes led to increasing in the dislocation density in the copper samples. Moreover, such deformed samples exh...
متن کاملHot Corrosion Behavior of Magnesite – Chromite Refractories Used in Reverberatory Furnaces at Sarcheshmeh Copper Complex
Iran’s Sarcheshmeh copper industries with an annual production of 120,000 tones are the biggest of it’s kind in South Asia. The main method of production is pyrometallurgical matte making in two reverberatory furnaces which use direct–bond magnesite-chromite refractories supplied by German and Austrian companies. Following a recent major overhaul, bricks in contact with slag, matte and furnace ...
متن کاملINVESTIGATING THE CORROSION BEHAVIOR OF NANO STRUCTURED COPPER STRIP PRODUCED BY ACCUMULATIVE ROLL BONDING (ARB) PROCESS IN ACIDIC CHLORIDE ENVIRONMENT
In this research accumulative roll bonding process as sever plastic deformation process was applied up to 8 cycles to produce the ultrafine grain copper. Microstructure of cycle 1, cycle 4 and cycle 8 investigated by TEM images. By analyzing TEM images the grain size measured below 100 nm in cycle 8 and it was with an average grain size of 200 nm. Corrosion resistance of rolled copper stri...
متن کاملInvestigation of the effect of explosive welding variables on the corrosion behavior of the joint of two explosive layers of 5000 series copper-copper sheets
In the present study, the corrosion behavior and microstructural changes of 5000 series aluminum and copper sheets after the explosive welding process have been investigated. Explosive welding is performed with a fixed stop interval and change of explosive load. Dynamic potential polarization tests and electrochemical impedance spectroscopy, light microscopy, and scanning electron microscopy we...
متن کاملInvestigation of the effect of explosive welding variables on the corrosion behavior of the joint of two explosive layers of 5000 series copper-copper sheets
In the present study, the corrosion behavior and microstructural changes of 5000 series aluminum and copper sheets after the explosive welding process have been investigated. Explosive welding is performed with a fixed stop interval and change of explosive load. Dynamic potential polarization tests and electrochemical impedance spectroscopy, light microscopy, and scanning electron microscopy we...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011