Nanostructuring of GeTiO amorphous films by pulsed laser irradiation

نویسندگان

  • Valentin Serban Teodorescu
  • Cornel Ghica
  • Adrian Valentin Maraloiu
  • Mihai Vlaicu
  • Andrei Kuncser
  • Magdalena Lidia Ciurea
  • Ionel Stavarache
  • Ana M Lepadatu
  • Nicu Doinel Scarisoreanu
  • Andreea Andrei
  • Valentin Ion
  • Maria Dinescu
چکیده

Laser pulse processing of surfaces and thin films is a useful tool for amorphous thin films crystallization, surface nanostructuring, phase transformation and modification of physical properties of thin films. Here we show the effects of nanostructuring produced at the surface and under the surface of amorphous GeTiO films through laser pulses using fluences of 10-30 mJ/cm(2). The GeTiO films were obtained by RF magnetron sputtering with 50:50 initial atomic ratio of Ge:TiO2. Laser irradiation was performed by using the fourth harmonic (266 nm) of a Nd:YAG laser. The laser-induced nanostructuring results in two effects, the first one is the appearance of a wave-like topography at the film surface, with a periodicity of 200 nm and the second one is the structure modification of a layer under the film surface, at a depth that is related to the absorption length of the laser radiation. The periodicity of the wave-like relief is smaller than the laser wavelength. In the modified layer, the Ge atoms are segregated in spherical amorphous nanoparticles as a result of the fast diffusion of Ge atoms in the amorphous GeTiO matrix. The temperature estimation of the film surface during the laser pulses shows a maximum of about 500 °C, which is much lower than the melting temperature of the GeTiO matrix. GeO gas is formed at laser fluences higher than 20 mJ/cm(2) and produces nanovoids in the laser-modified layer at the film surface. A glass transition at low temperatures could happen in the amorphous GeTiO film, which explains the formation of the wave-like topography. The very high Ge diffusivity during the laser pulse action, which is characteristic for liquids, cannot be reached in a viscous matrix. Our experiments show that the diffusivity of atomic and molecular species such as Ge and GeO is very much enhanced in the presence of the laser pulse field. Consequently, the fast diffusion drives the formation of amorphous Ge nanoparticles through the segregation of Ge atoms in the GeTiO matrix. The nanostructuring effects induced by the laser irradiation can be used in functionalizing the surface of the films.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Test-Photostability of pulsed laser deposited amorphous thin films from Ge-As-Te system

Amorphous thin films from Ge-As-Te system were prepared by pulsed laser deposition to study their intrinsic photostability, morphology, chemical composition, structure and optical properties. Photostability of fabricated layers was studied by spectroscopic ellipsometry within as-deposited as well as relaxed (annealed) layers. For irradiation, laser sources operating at three wavelengths in band...

متن کامل

Femtosecond laser induced surface nanostructuring and simultaneous crystallization of amorphous thin silicon film.

Ultrafast pulsed laser irradiation is demonstrated to be able to produce surface nano-structuring and simultaneous crystallization of amorphous silicon thin film in one step laser processing. After fs laser irradiation on 80 nm-thick a-Si deposited on Corning 1737 glass substrate, the color change from light yellow to dark brown was observed on the sample surface. AFM images show that the surfa...

متن کامل

Temporal profile of optical transmission probe for pulsed-laser heating of amorphous silicon films

Pulsed laser irradiation is employed over a wide spectrum of materials processing applications, including surface hardening, alloying, curing, synthesis of compound and semiconductor films. In semiconductor systems,* it is used to anneal ion-implantation surface damage, recrystallize amorphous and polycrystalline films, and enhance dopant diffusion. Recent studies2 have shown that one of the mo...

متن کامل

Formation of Three Dimensional Ni Nanostructures for Large Area Catalysts

The formation of Ni nanostructures to act as catalysts in the growth of carbon nanotubes is reported. The changes in the surface morphology of Ni produced by three methods thermal evaporation and annealing of thin films, pulsed laser ablation and annealing of Ni, and the use of metal containing macromolecules have been investigated by atomic force microscopy and scanning electron microscopy. In...

متن کامل

Nanostructuring of thin films by ns pulsed laser interference

We show that nanosecond pulsed laser interference can be used to structure surfaces on a nanoscale. With this method, we are able to create hollow structures on various thin films like Ta, Ni, Au, Cu, Co, and NiTi. We find that the structuring mechanism is related to the mechanical effect of thermal expansion upon melting. To corroborate this model, we study materials with an abnormal behavior ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2015