Diffusion of gaseous and supercritical CO 2 through polycarbonate 1

نویسنده

  • Rahmi Ozisik
چکیده

Submitted for the MAR13 Meeting of The American Physical Society Diffusion of gaseous and supercritical CO2 through polycarbonate 1 MICHAEL GOODMAN, RAHMI OZISIK, Rensselaer Polytechnic Institute — The design of polymeric materials for applications such as separation membranes and nanostructured foams requires prediction of gas transport properties under a wide range of pressures. In the current study, transport of CO2 both in gaseous and supercritical state through samples of polycarbonate at 51 ◦C and pressures from 15 to 2000 psi was measured using an asymptotic time lag apparatus. Through volumetric calibration, the traditional analysis was extended to yield permeability (P) and solubility (S), in addition to the usual asymptotic diffusivity (Da). Nonlinear least squares fitting to a truncated series solution then provided an alternative measurement of the (transient) diffusivity (Dt), as well as the surface concentration (Co) of adsorbed gas. At 1 atm, Da and Dt were within a factor of 2 from selected handbook values; and with increasing pressure, both exhibited an overall downward trend, consistent with other studies, but an unexpected dropoff occurred between 1350 and 1500 psi. As expected, Co showed an overall increase with pressure, but as with P and S, displayed a peculiar drop between 1350 and 1500 psi. Measurement of Co in polycarbonate has never been done before and constitutes a novel feature of this study. 1This work was partially supported by DUE-1003574. Rahmi Ozisik Rensselaer Polytechnic Institute Date submitted: 09 Nov 2012 Electronic form version 1.4

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Hydrogen rich gas production via nano-catalytic gasification of bagasse in supercritical water

Ru/Al2O3 nano-catalysts were prepared with impregnation and microemulsion techniques. The supercritical water gasification reaction was performed at 400oC and 5-60 min. Within the tested operation conditions, the reaction residence time of 15 min was the optimum to maximize the H2 yield. It was observed that using microemulsion technique increases the total gas yield significantly. Using microe...

متن کامل

Characterizing the Dissolution Rate of CO2-Brine in Porous Media under Gaseous and Supercritical Conditions

The CO2-brine dissolution homogenizes the distribution of residual CO2 and reduces the leakage risk in the saline aquifer. As a key parameter to immobilize the free CO2, the dissolution rate of CO2-brine could be accelerated through mechanisms like diffusion and dispersion, which are affected by the subsurface condition, pore structure, and background hydrological flow. This study contributed t...

متن کامل

Comparative of Physico-Chemical Properties of Wheat Germ Oil Extracted with Cold Press and Supercritical CO2 Extraction

In this study, moisture content, free fatty acids, peroxide, iodine value, unsaponifiable matter, saponification value, fatty acid composition and tocopherol contents of wheat germ oil obtained by SC-CO2 extraction and cold press technology were investigated. Moisture, free fatty acid (FFA), peroxide value, iodine value, unsaponifiable matter and saponification value of cold pres...

متن کامل

Drug Nano-Particles Formation by Supercritical Rapid Expansion Method; Operational Condition Effects Investigation

Dissolution pressure and nozzle temperature effects on particle size and distribution were investigated for RESS (Rapid Expansion of Supercritical Solution) process. Supercritical CO2 was used as solvent and Ibuprofen was applied as the model component in all runs. The resulting Ibuprofen nano-particles (about 50 nm in optimized runs) were analyzed by SEM and laser diffraction pa...

متن کامل

Anomalous Stability of “colored” Form of Spiroxazine Photochroms Trapped in Polycarbonate Matrix after Supercritical Fluid Impregnation

Various thermoplastic polymers (polyethylene, polypropylene, PMMA, polycarbonate) were impregnated with spiroxazine photochrom (-1,3,3-threemethylspyro (indoline-2,3-3Нantrazeno[2,1-b] [1,4] oxazin) (SAO) dissolved in supercritical CO2 SAO molecules have usually stable unexcited form (A) that transfers to unstable “colored” form (B) under the action of UV light. It was found that, unlike other ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013