Theoretical Analysis of Scanning Electron Microscopes with Plural Detectors as an Application Field of Photometric Stereo
نویسنده
چکیده
Surface topography measurement methods using SEM with plural detectors are analyzed as an application field * . of photometric stereo. Plural-detector methods use images from several detectors. These images correspond to ordinary images made with the light source in different positions. SEMs are usually treated as a field for application of shape from shading, but we shodld consider that detector positions also affect the image intensities or shadings. Photometric stereo can therefore be applied to SEM especially with plural detectors. This study shows experimental results and then gives some theoretical analyses needed to get high-resolution results. Exact rather than empirical formulas are given for calculating inclination angle from the data gathered by twoand four-detector SEM systems. An approach to eliminating the shadow distortion effect is shown.
منابع مشابه
Performance Estimation of a Real-time Aberration Correction System for Scanning Transmission Electron Microscopes
The resolution of a scanning transmission electron microscope remains 100 times worse than its theoretical limit owing to the spherical aberration of objective lens. Ikuta proposed a system to generate an aberration-free amplitude image and phase image using multiple small detectors with real-time signal processing. This study shows the performance optimization results of its signal processing ...
متن کاملSEM Image Observation Using an Electron Energy and Electron Take-off Angle Filtered Detector
Scanning electron microscopes (SEMs) are usually equipped with two types of detectors: secondary and backscattered electron detectors. The former produces secondary electron images (SEI) rich in topographic information[1, 2], whereas the latter produces backscattered electron images (BEI) rich in composition information[3]. Recently, however, a few other detectors have been installed in additio...
متن کاملStereomicroscopy: 3D Imaging and the Third Dimension Measurement
Introduction Scanning electron microscopy (SEM) has been widely used for imaging objects with various dimensions ranging from millimeters to nanometers. Compared with other common microscopies, SEM offers a unique combination of imaging characteristics including high lateral resolution, broad magnification range, and large depth of field. As the working mechanism of SEM, a focused electron beam...
متن کاملBackscattered Electrons Topographic Mode Problems in the Scanning Electron Microscope
The application of several backscattered electron (BSE) detectors makes it possible to separate topographic (TOPO) contrast and material (COMPO) contrast in a scanning electron microscope (SEM). The BSE signals from six p-i-n diodes were used to investigate some artifacts connected with the reconstruction of real topography. The location of these diodes has been predicted theoretically to obtai...
متن کاملHigh spatial resolution energy dispersive X-ray spectrometry in the SEM and the detection of light elements including lithium
Current technology for energy-dispersive X-ray spectrometry using silicon-drift detectors in combination with the latest field-emission scanning electron microscopes delivers routine nanoscale characterisation of structures as small as 50 nm. This performance relies on a combination of high spectral resolution and large sensor area. Results from the latest developments in low-noise electronics ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1992