Bond Graph Model of a Squirrel Cage Induction Motor With Direct Physical Correspondence
نویسندگان
چکیده
An existing bond graph of a squirrel cage induction motor was modified to make the bond graph physically more representative. The intent was to form a one-to-one correspondence between motor components and bond graph elements. Components explicitly represented include the stator coils, the squirrel cage rotor bars, and the magnetic flux routing section. The final bond graph spans electrical, magnetic, and mechanical energy domains, and contains common motor faults. From this bond graph. state equations were extracted and simulations performed. Simulated were the response of healthy motors, and motors with shorted stator coils and broken rotor bars. @S0022-0434~00!01203-X#
منابع مشابه
Magnetic Saturation Impacts on Fault Analysis of Squirrel-Cage Induction Motors using Winding Function Approach
Multiple coupled circuit modeling of squirrel-cage induction motors, or winding function approach is the most detailed and complete analytical model used to analyze the performance of the faulty induction motors. This paper extends the above-mentioned model to a saturable model including variable degrees of the saturation effects using an appropriate air gap function and novel techniques for lo...
متن کاملIncreasing the Efficiency of the Power Electronic Converter for a Proposed Dual Stator Winding Squirrel-Cage Induction Motor Drive Using a Five-Leg Inverter at Low Speeds
A dual stator winding squirrel-cage induction motor (DSWIM) is a brushless single-frame induction motor that contains a stator with two isolated three-phase windings wound with dissimilar numbers of poles. Each stator winding is fed by an independent three-phase inverter. The appropriate efficiency of this motor is obtained when the ratio of two frequencies feeding the machine is equal to the r...
متن کاملOptimal design of squirrel cage induction motor using multi-objective Salp Swarm Algorithm
The design of three-phase induction motors is a challenge in electrical engineering. Therefore, new design techniques are continuously provided. Since the design of the induction motors is carried out for different purposes, it is difficult to find a method that can addresses all the targets. Nowadays, the normal methods used to solve multi-objective problems are the optimization strategies. In...
متن کاملAccurate Finite Elements Analysis of a Railway Traction Squirrel-cage Induction Motor for Phase-model Parameters Identification and Rotor Fault Simulations
The behavior of a railway traction squirrel cage induction motor under rotor fault conditions is simulated by a complete phase model. A simple and direct procedure for model parameters identification by finite elements method (FEM) is described.
متن کاملMagnetic Saturation Impacts on Fault Analysis of Squirrel-cage Six Phases Induction Motors using Winding Function Approach
Multiple coupled circuit modeling (MCCM) of squirrel-cage induction motors (SCIMs), or winding function approach is the most detailed and complete analytical model used to analyze the performance of faulty SCIMs. Already, in variate papers this approach was used to 3phases SCIMs, but this paper extends the above-mentioned model to 6phases SCIMs. Various simulations of variative faults are carri...
متن کامل