Multiprotocol Label Switching (MPLS) on Cisco Routers
ثبت نشده
چکیده
This document describes commands for configuring and monitoring Multiprotocol Label Switching (MPLS) functionality on Cisco routers and switches. This document is a companion to other feature modules describing other MPLS applications. This document includes the following sections: • Feature Overview • Supported Standards, MIBs, and RFCs • Configuration Tasks • Glossary The following table outlines the release history of this document over time and the changes made thereto in support of new MPLS/LDP functionality.
منابع مشابه
Applicability Statement for Restart Mechanisms for the Label Distribution Protocol (LDP)
Multiprotocol Label Switching (MPLS) systems are used in core networks where system downtime must be kept to a minimum. Similarly, where MPLS is at the network edges (e.g., in Provider Edge (PE) routers) [RFC2547], system downtime must also be kept to a minimum. Many MPLS Label Switching Routers (LSRs) may, therefore, exploit Fault Tolerant (FT) hardware or software to provide high availability...
متن کاملConnecting IPv6 Islands over IPv4 MPLS Using IPv6 Provider Edge Routers (6PE)
This document explains how to interconnect IPv6 islands over a Multiprotocol Label Switching (MPLS)-enabled IPv4 cloud. This approach relies on IPv6 Provider Edge routers (6PE), which are Dual Stack in order to connect to IPv6 islands and to the MPLS core, which is only required to run IPv4 MPLS. The 6PE routers exchange the IPv6 reachability information transparently over the core using the Mu...
متن کاملOSPF for BGP / MPLS IP VPNs
Many Service Providers offer Virtual Private Network (VPN) services to their customers, using a technique in which customer edge routers (CE routers) are routing peers of provider edge routers (PE routers). The Border Gateway Protocol (BGP) is used to distribute the customer’s routes across the provider’s IP backbone network, and Multiprotocol Label Switching (MPLS) is used to tunnel customer p...
متن کاملCisco MPLS based VPNs: Equivalent to the security of Frame Relay and ATM
The purpose of this white paper is to present discussion and findings that conclude that Cisco MPLS-based VPNs are as secure as their layer 2 counterparts such as FrameRelay and ATM. This document details a series of tests were carried out on a Cisco router test bed validating that MPLS based VPNs (MPLS-VPN) provide the same security as Frame-Relay or ATM. ATM and Frame-Relay have a reputation ...
متن کاملMPLS Transport Profile (MPLS-TP) Traffic Engineering (TE) Management Information Base (MIB)
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes additional managed objects and textual conventions for tunnels, identifiers, and Label Switching Routers to support Multiprotocol Label Switching (MPLS) MIB modules for transport networks.
متن کامل