Finite element model updating based on eigenvalue and strain energy residuals using multiobjective optimisation technique

The numerical results from a finite element (FE) model often differ from the experimental results of real structures. FE model updating is often required to identify and correct the uncertain parameters of FE model and is usually posed as an optimisation problem. Setting up of an objective function, selecting updating parameters and using robust optimisation algorithm are three crucial steps in FE model updating. In this paper, a multiobjective optimisation technique is used to extremise two objective functions simultaneously which overcomes the difficulty of weighing the individual objective function of more objectives in conventional FE model updating procedure. Eigenfrequency residual and modal strain energy residual are used as two objective functions of the multiobjective optimisation. Only few updating parameters are selected on the basis of the prior knowledge of the dynamic behaviours of the structure and eigenfrequency sensitivity study. The proposed FE model updating procedure is first applied to the simulated simply supported beam. This case study shows that the methodology is robust with an effective detection of assumed damaged elements. The procedure is then successfully applied to the updating of a precast continuous box girder bridge that was tested on field under operational conditions. r 2006 Elsevier Ltd. All rights reserved.