Damage classification in carbon fibre composites using acoustic emission: A comparison of three techniques
نویسندگان
چکیده
http://dx.doi.org/10.1016/j.compositesb.2014.08.046 1359-8368/ 2014 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/3.0/). ⇑ Corresponding author. Tel.: +44 2920875924. E-mail addresses: mccroryjp@cardiff.ac.uk (J.P. McCrory), al-jumailisk@cardiff. ac.uk (S.Kh. Al-Jumaili), davide.crivelli@polimi.it (D. Crivelli), pearsonmr@cardiff.ac. uk (M.R. Pearson), eatonm@cardiff.ac.uk (M.J. Eaton), featherstonca@cardiff.ac.uk (C.A. Featherston), mario.guagliano@polimi.it (M. Guagliano), holford@cardiff.ac.uk (K.M. Holford), pullinr@cardiff.ac.uk (R. Pullin). John P. McCrory a,⇑, Safaa Kh. Al-Jumaili , Davide Crivelli , Matthew R. Pearson , Mark J. Eaton , Carol A. Featherston , Mario Guagliano , Karen M. Holford , Rhys Pullin a
منابع مشابه
Flexural monitoring of carbon fiber/epoxy composite by acoustic emission
Carbon / epoxy composite is one of the most useful polymer matrix composites that has special properties such as high strength-to-weight ratio, high hardness, high corrosion resistance, Resistance to nuclear radiation has high consumption in different industries such as aerospace industry. Therefor monitoring of loading of this type of composite is important. In order to determine failure mecha...
متن کاملApplication of Acoustic Emission Analysis for Damage Investigations in Fibre and Textile Reinforced Composites
For the verification of pertinent failure and damage models of fibre and textile reinforced composites a clear identification of the particular damage entities is an essential premise. In such fibrous composites, the characteristic failure mechanisms are initiated on the microscale and result in a spontaneous release of elastic energy in terms of mechanical stress waves, the so-called acoustic ...
متن کاملDamage Energy Evaluation in [55/-55]9 Composite Pipes using Acoustic Emission Method
In this study, the longitudinal and hoop tensile strengths of an industrial ±55° Glass Reinforced Epoxy (GRE) pipe with eighteen layers as well as the associated failure mechanisms are determined. To obtain the longitudinal and hoop tensile strengths values, three specimens are cut from the studied GRE pipe in each direction. A comparison is done between both the strength values, and the fractu...
متن کاملHealth Monitoring for Composite under Low-Cycle Cyclic Loading, Considering Effects of Acoustic Emission Sensor Type
Composites have been widely used in the aerospace industry. Due to the requirement of a high safety for such structures, they could be considered for health monitoring. The acoustic emission approach is one of most effective methods for identifying damages in composites. In this article, standard specimens were made from carbon fibers and the epoxy resin, with the [03/902/...
متن کاملTransverse Crack Detection in 3D Angle Interlock Glass Fibre Composites Using Acoustic Emission
In addition to manufacturing cost and production rates, damage resistance has become a major issue for the composites industry. Three-dimensional (3D) woven composites have superior through-thickness properties compared to two-dimensional (2D) laminates, for example, improved impact damage resistance, high interlaminar fracture toughness and reduced notch sensitivity. The performance of 3D wove...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014