Bluetooth adaptive techniques to mitigate interference
نویسندگان
چکیده
In this paper, we investigate the use of adaptive techniques to mitigate interference for Bluetooth systems in the presence of WLAN direct sequence spread spectrum devices. We consider two different techniques that attempt to avoid time and frequency collisions of WLAN and Bluetooth transmissions. We conduct a comparative analysis of their performance for several dynamic scenarios where the WLAN interference varies over time due to either change in user activity or number of non-overlapping WLAN systems. We discuss the trade-offs involved in terms of delay, packet loss performance, and synchronization.
منابع مشابه
Coexistence of IEEE 802.11b and Bluetooth: An Integrated Performance Analysis
IEEE 802.11b wireless networks and Bluetooth networks provide complimentary services using the same unlicensed radio frequency band. As the benefits of utilizing these services become increasingly apparent, the likelihood of mutual interference also increases. The wellknown frequency hopping algorithm and adaptive frequency hopping algorithm do not fully consider the interference level of the o...
متن کاملTechniques to improve the performance of TCP in a mixed Bluetooth and WLAN environment
A major challenge for the WLAN technology stems from having to share the 2.4 GHz ISM band with other wireless devices such as Bluetooth radios. The main goal of this paper is to investigate the use of techniques to mitigate the effects of interference for Bluetooth and WLAN and discuss the resulting performance trade-offs. We compare the performance of the Bluetooth and WLAN systems and evaluat...
متن کاملAn Investigation of the Impact of Bluetooth Interference on the Performance of 802.11g Wireless Local Area Networks
In recent years there has been considerable interest in the development of standards for Wireless Local Area Networks. In particular, IEEE’s 802.11 standard has now been extended to a family of WLAN standards. 802.11a and 802.11g both employ COFDM but operate in different frequency bands. The 802.11g physical layer standard specifies a link adaptive COFDM scheme for operation in the 2.4GHz ISM ...
متن کاملSpoofing Mitigation of GPS Receiver using Least Mean Squares-Based Adaptive Filter
The Global Positioning System (GPS) signals are very weak signal over wireless channels, so they are vulnerable to in-band interferences. Therefore, even a low-power interference can easily spoof GPS receivers. Among the variety of GPS signal interference, spoofing is considered as the most dangerous intentional interference. The spoofing effects can mitigate with an appropriate strategy in the...
متن کاملA Collocated Approach for Coexistence Resolution in Wireless Home Networking
In a home networking environment where more than one radio devices that are using 2.4GHz band within a certain distance may result in a significant interference. This research mainly focused on particular technologies that operate in 2.4GHz radio channel analysing the fact that the Bluetooth and Wi-Fi radio operation in a wireless network environment may create interference and may deliver poor...
متن کامل