Injection moulding temperature and powder loading influence to the metal injection moulding (MIM) green compact
نویسندگان
چکیده
1 UTM Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia, International Campus, 54100 Kuala Lumpur, Malaysia. 2 Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia. 3 Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia. 4 Faculty of Mechanical Engineering, Universiti Technologi MARA, 40450 Shah Alam, Selangor, Malaysia.
منابع مشابه
Microporous Titanium through Metal Injection Moulding of Coarse Powder and Surface Modification by Plasma Oxidation
Titanium is one of the most attractive materials for biomedical applications due to having excellent biocompatibility accompanied by good corrosion resistance. One popular processing technique for Ti is Metal Injection Moulding (MIM). However, there are several issues associated with the use of this technique, such as the high cost of the fine powder used, the high level of contamination and co...
متن کاملInvestigation on the Achievable Flow Length in Injection Moulding of Polymeric Materials with Dynamic Mould Tempering
A variety of parts in microsystems technology are manufactured by injection moulding of polymeric materials. In Particular the high cooling velocity affects negatively the process and the resulting part properties. The scope of this paper is to investigate the influence on the reachable flow length in injection moulding of different polymeric materials. The results indicate that the mould tempe...
متن کاملPolyolefin backbone substitution in binders for low temperature powder injection moulding feedstocks.
This paper reports the substitution of polyolefin backbone binder components with low melting temperature carnauba wax for powder injection moulding applications. The effect of various binder compositions of Al₂O₃ feedstock on thermal degradation parameters is investigated by thermogravimetric analysis. Within the experimental framework 29 original feedstock compositions were prepared and the s...
متن کاملConsolidation phenomena in laser and powder-bed based layered manufacturing
Layered manufacturing (LM) is gaining ground for manufacturing prototypes (RP), tools (RT) and functional end products (RM). Laser and powder bed based manufacturing (i.e. selective laser sintering/melting or its variants) holds a special place within the variety of LM processes: no other LM techniques allow processing polymers, metals, ceramics as well as many types of composites. To do so, ho...
متن کاملThe effect of powder characteristics on pressure sensitivity of powder injection moulding compounds
Pressure effect on the rheological behaviour of powder-polymer compounds intended for powder injection moulding was determined. A single-piston capillary rheometer modified by addition of a second chamber with a restricting needle valve generating backpressure increasing the pressure in the melted material during the flow through the die was employed to determine pressure sensitivity coefficien...
متن کامل