Lever-arm and mini-implant system for anterior torque control during retraction in lingual orthodontic treatment.

نویسندگان

  • Ryoon-Ki Hong
  • Jung-Min Heo
  • Young-Ki Ha
چکیده

Anterior torque control during retraction is difficult to achieve with lingual orthodontic treatment. This article describes the use of a lever-arm and mini-implant system as absolute anchorage for controlled retraction of the anterior teeth during lingual orthodontic treatment and evaluates 2 protrusion cases treated with this system. Various clinical situations are discussed and analyzed from a biomechanical standpoint. Mini-implants are needed to control the point of force application in the posterior area and produce en masse retraction with no anchorage loss. When the length of the lever-arm is adjusted to the position of the mini-implant, the desired line of action of the retraction force with respect to the center of resistance of the anterior segment is selected. Controlled retraction of the anterior teeth was achieved with no loss of anchorage. The mini-implant, in conjunction with the lever-arm, is useful not only for absolute anchorage but also for anterior torque control during retraction in lingual orthodontic treatment.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of lingual en masse retraction combining a C-lingual retractor and a palatal plate.

OBJECTIVES To analyze the results of employing en masse retraction of the maxillary anterior dentition using palatal temporary skeletal anchorage devices (TSADs) as the exclusive source of anchorage. MATERIALS AND METHODS A retrospective clinical investigation supported by preliminary case reports was performed comparing pretreatment cephalometric radiographs with those taken after en masse r...

متن کامل

Computer-Aided Designing and Manufacturing of Lingual Fixed Orthodontic Appliance Using 2D/3D Registration Software and Rapid Prototyping

The availability of 3D dental model scanning technology, combined with the ability to register CBCT data with digital models, has enabled the fabrication of orthognathic surgical CAD/CAM designed splints, customized brackets, and indirect bonding systems. In this study, custom lingual orthodontic appliances were virtually designed by merging 3D model images with lateral and posterior-anterior c...

متن کامل

Effectiveness of mini implants in three-dimensional control during retraction - a clinical study.

INTRODUCTION Three-dimensional control throughout the orthodontic treatment is essential for uncompromised results. Mini screws introduced for orthodontic anchorage has given the clinician an option of absolute three dimensional control. The purpose of this study was to compare and measure the vertical control and torque control of incisors and molar during enmass retraction with titanium micro...

متن کامل

Stress distribution patterns at mini-implant site during retraction and intrusion—a three-dimensional finite element study

BACKGROUND The purpose of this study was to evaluate the stress patterns produced in mini-implant and alveolar bone, for various implant dimensions, under different directions of simulated orthodontic force, using a three-dimensional finite element method. METHODS Eight finite element (FE) models of mini-implant and bone were generated with insertion angles of 30° and 60°, diameters of 1 and ...

متن کامل

Torque control during lingual anterior retraction without posterior appliances

OBJECTIVE To evaluate the factors that affect torque control during anterior retraction when utilizing the C-retractor with a palatal miniplate as an exclusive source of anchorage without posterior appliances. METHODS The C-retractor was modeled using a 3-dimensional beam element (0.9-mm-diameter stainless-steel wire) attached to mesh bonding pads. Various vertical heights and 2 attachment po...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Angle orthodontist

دوره 75 1  شماره 

صفحات  -

تاریخ انتشار 2005