Determination of nickel in alloys and plant leaves with salicylaldehyde 3-oxobutanoylhydrazone by spectrophotometry.
نویسندگان
چکیده
A simple and highly sensitive reagent of salicylaldehyde 3-oxobutanoylhydrazone (salicylaldehyde acetoacetic acid hydrazone, SAAH) was synthesized and studied for the spectrophotometric determination of nickel in detail. In the pH range 6, which greatly increased the selectivity, nickel reacted with SAAH to form a 1:1 yellow complex, having a sensitive absorption peak at 405 nm. Under the optimal conditions, Beer's law was obeyed over the range from 0.0117 to 0.1174 microg cm(-3). The apparent molar absorptivity was 3.025 x 10(5) dm3 mol(-1) cm(-1). The detection limit and the variation coefficient were found to be 1.752 ng cm(-3) and 1.0%, respectively. The method has been applied to the quantitative determination of nickel in different alloys and leaves.
منابع مشابه
Highly Selective Derivative Spectrophotometry for Determination of Nickel Using 1-(2-Pyridylazo)-2-naphthol in Tween 80 Micellar Solutions
A spectrophotometric and first derivative spectrophotometric method was developed in aquatic Tween 80 micellar solutions for selective determination of nickel without using any pre-separation step. 1-(2-Pyridylazo)2-naphthol (PAN), as a sensitive chromogenic complexing agent formed a red-colored Ni(II)-PAN complex in Tween 80 media with satisfactory solubility and stability. Conditions such as ...
متن کاملSimultaneous determination of titanium and molybdenum in alloy steels using derivative spectrophotometry in neutral micellar medium
A simple, selective and sensitive spectrophotometric method has been developed for the individual and simultaneous determination of Ti(IV) and Mo(VI) using salicylaldehyde p-hydroxybenzoylhydrazone (SAPHBH) in presence of Triton X100, without any prior separation. Beer’s law is obeyed between 0.15-2.0 and 0.20-2.51 μgmL concentration of Ti(IV) and Mo(VI) at 470 and 410 nm, respectively. The mol...
متن کاملDirect and Derivative Spectrophotometric Determination of Copper(II) with 5-Bromosalicylaldehyde Thiosemicarbazone
A rapid and sensitive spectrophotometric method is developed for the determination of Copper (II) in aqueous DMF medium. The metal ion forms a light greenish yellow coloured complex with 5-bromo salicylaldehyde thiosemicarbazone (5-BSAT) in acidic medium. The complex shows absorption maximum at 390nm. Beer's law is obeyed in the range 0.31 – 6.35 gml -1 of Copper (II). The molar absorptivity ( ...
متن کاملPreconcentration of Trace Vanadium with the Ion Pair of 2-Nitroso-1-Naphthol-4-Sulfonic Acid and Tetradecyldimethylbenzylammonium Chloride Onto Microcrystaline Naphthalene and Determination by Derivative Spectrophotometry
Vanadium is quantitatively retained on 2-nitroso-1-naphhthol-4-sulfonic acid tetradecyldimethlbenzyammonium chloride onto microcrystalline naphthalene in the pH range of 3.0-4.0 from a large volume of aqueous solutions of various alloys and synthetic samples. After filtration, the solid mass consisting of the vanadium complex and naphthalene was dissolved with 5.0 mL of dimethylformamide an...
متن کاملNickel and zinc determination by flow-injection solid-phase spectrophotometry exploiting different sorption rates.
Flow-injection solid-phase spectrophotometry is applied for sequential determination of nickel and zinc, exploiting their different sorption rates on 1-(2-thiazolylazo)-2-naphthol (TAN) immobilized on C(18)-bonded silica. The Zn(II) sorption rate on the solid support is constant for flow rates ranging from 0.70 to 2.2 ml min(-1), but for Ni(II) the sorption rate decreases with increasing flow r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Analytical sciences : the international journal of the Japan Society for Analytical Chemistry
دوره 20 6 شماره
صفحات -
تاریخ انتشار 2004