Characterising the morphological properties and surface composition of radium contaminated particles: a means of interpreting origin and deposition.
نویسندگان
چکیده
Radioactive 'hot particles' that occur in the environment present specific challenges for health and environmental regulators as often their small size makes them difficult to detect, and they are easily dispersed and accidentally ingested or inhaled by members of the public. This study of nine hot particles recovered from the beach at Dalgety Bay, UK, uses a combination of gamma spectrometry, imaging microscopy and SEM-EDX in order to characterise their morphology and surface composition, thereby helping to identify their origin and source characteristics. The nine particles analysed showed great heterogeneity in their activities, physical form and elemental composition. The particle activities were dominated by (226)Ra and its daughters. Three distinct grouping of particles were identified based on their morphology (artefact, glassy and 'metal-rich'), whilst four distinct groupings (artefact, glassy, angular and porphyric, rounded and highly porous) were identified based on morphology and surface properties as seen in the SEM. Whilst the 'artefact' particles were little altered, the other particles showed evidence of incineration. All particles were in a size and/or shape class vulnerable to wind- or water-mediated transport. No correlations were found between morphology and chemical composition. SEM-EDX analysis revealed C, Si, Zn, Fe, Ca are common in the particles together with Ba, Ni, Pb, Cu, Mn and Ti. This is interpreted as the particles being derived from radium containing luminescent paint containing a Zn/S phosphor, a hydrocarbon base and other fillers and additives. Evidence of copper and steel alloys were also present in some particles, whilst one consisted of a hydrocarbon based 'capsule'. The combination of techniques employed here has enabled interpretation of the origins of the radioactive particles and given insights into the potential movement of particles within the local environment.
منابع مشابه
Deposition of Various Shapes Particles on a Rough Surface in Turbulent Flow
An experiment set-up is used to study wall deposition rate of particles on a rough surface in a turbulent channel flow. Deposition velocities for three classes of particles, namely, spherical glass particles, irregular shape polymer particles, and fibrous silicon particles are studied. The particle concentration at the test section was measured with the aid of an isokinetic probe in conjunction...
متن کاملSynthesis and characterization of Fe3O4@Ag core-shell: structural, morphological, and magnetic properties
This paper is a report on the synthesis of the Fe3O4@Ag core-shell with high saturation magnetization of magnetite nanoparticles as the core, by using polyol route and silver shell by chemical reduction. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy analyses confirmed that the particles so produced were monophase. The magnetic properties of the product were investigated by...
متن کاملSTUDY OF CHARACTERIZATION AND CORROSION RESISTANCE OF NIP/NANO-DIAMOND ELECTROLESS COMPOSITE DEPOSITION
Ni-P Electroless coatings provide appropriate resistance to wear and corrosion. Co-deposition of particles between layers can improve their properties, especially general corrosion and erosion-corrosion behavior by means of nano diamond as reinforcing particles. In this study Ni-P/nano diamond composite deposition were deposited on steel substrate. Structure of the coatings and corrosion r...
متن کاملAffectability of ceramic nanoparticles of different compound from surface characteristics in AC electrophoretic deposition
Surface characteristic of particles is one of the main parameters controlling the properties of deposited layer in electrophoretic deposition. To modify the surface characteristic of particles, one of the methods is the addition of additives to the suspensions of powder-solvent. There are many reports dealing with the effect of surface characteristics of particles on uniformity and pattern of d...
متن کاملThe Effects of Agitation on the Properties of Antifriction Ni-P-MoS2 Composite Coatings
In this work the effects of various methods of agitation on the properties of electroless Ni-P-MoS2 composite coatings were investigated. Magnetic stirring as well as purging the solution with gas (Air, Oxygen, Nitrogen) were used. Plating rate, chemical composition, MoS2 distribution, and hardness of the deposit were measured. Topography of coating was studied with metallography and scanning e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Environmental science. Processes & impacts
دوره 15 10 شماره
صفحات -
تاریخ انتشار 2013