In-plane all-photonic transduction with differential splitter using double-step rib waveguide for photonic microcantilever arrays.
نویسندگان
چکیده
We report a differential splitter consisting of an asymmetric double-step multimode rib waveguide and a Y-branch splitter for in-plane photonic transduction of photonic microcantilever deflection. Arrays of photonic microcantilevers are integrated with differential splitters and an optical waveguide network to demonstrate uniformity and sensitivity of transduction. Measurement results from multiple arrays indicate a sensitivity of 0.32x10(-3) nm(-1) and minimum detectable deflection of 141 pm for a 3.5 Hz measurement bandwidth.
منابع مشابه
In-Plane All-Photonic Transduction Method For Silicon Photonic Microcantilever Array Sensors
In-plane All-photonic Transduction Method For Silicon Photonic Microcantilever Array Sensor Jong Wook Noh Department of Electrical and Computer Engineering Doctor of Philosophy We have invented an in-plane all-photonic transduction method for photonic microcantilever arrays that is scalable to large arrays for sensing applications in both bioand nanotechnology. Our photonic transduction method ...
متن کاملDemonstration of microcantilever array with simultaneous readout using an in-plane photonic transduction method.
We demonstrate a microcantilever array with an in-plane photonic transduction method for simultaneous readout of each microcantilever. The array is fabricated on a silicon-on-insulator substrate. Rib waveguides in conjunction with a compact waveguide splitter network comprised of trench-based splitters and trench-based bends route light from a single optical input to each microcantilever on the...
متن کاملIn-plane photonic transduction of silicon-on-insulator microcantilevers.
We demonstrate an in-plane photonic transduction method for microcantilevers, which have been widely investigated for sensor applications. In our approach the microcantilever is etched to form a single mode rib waveguide. Light propagates down the microcantilever and crosses a small gap at the free end of the microcantilever, some of which is captured by an asymmetrical multimode waveguide that...
متن کاملDesign of Photonic Crystal Polarization Splitter on InP Substrate
In this article, we suggested a novel design of polarization splitter based on coupler waveguide on InP substrate at 1.55mm wavelength. Photonic crystal structure is consisted of two dimensional (2D) air holes embedded in InP/InGaAsP material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. The photonic band gap (PBG) of this structure is determined using t...
متن کاملDemonstration of Microcantilever Biosensor Array with In-plane Photonic Transduction Mechanism
We review progress toward microcantilever arrays with in-plane photonic readout for biosensing applications. Microcantilever arrays are fabricated on individual silicon-on-insulator (SOI) chips and integrated with two-layer polydimethylsiloxane (PDMS) microfluidics that incorporate fluid channels and valves. Microcantilever functionalization is accomplished by inkjetting appropriate fluids onto...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 17 22 شماره
صفحات -
تاریخ انتشار 2009