Vibration Analysis of Glass Fiber Reinforced Composites
نویسنده
چکیده
Glass fiber reinforced resol/vac-eha composites have been fabricated in laboratory to determine the dynamic behavior of glass fiber reinforced composites. Resol solution was blended with vinyl acetate-2-ethylhexyl acrylate (vac-eha) resin in an aqueous medium with varying volume fraction of glass fibers. The role of fiber/matrix interactions in glass fibers reinforced composites were investigated to predict the stiffness and damping properties. In order to study the static and dynamic response of Resol, Resol/VAC-EHA blend and glass fibers reinforced composites, a multiquadric radial basis function (MQRBF) method is developed. MQRBF is applied for spatial discretization and a Newmark implicit scheme is used for temporal discretization. The discretization of the differential equations generates a larger number of algebraic equations than the unknown coefficients. To overcome this ill conditioning, the multiple linear regression analysis, which is based on the least square error norm, is employed to obtain the coefficients. Simple supported and clamped boundary conditions are considered. Numerical results are compared with those obtained by other analytical methods. Notations : b a, -Dimension of plates, h ----Thickness of plates, R ----Aspect ratio ) / ( b a , LT --Major Poisson’s ratio, C C , * ----Viscous damping, dimensionless viscous damping, 66 12 22 11 , , , D D D D ----Flexural rigidity of plates, T L E E , ----Young’s modulus in * * , y x direction respectively, LT G ---Shear modulus relative to * * y x direction, Q q, ---Transverse load, dimensionless transverse load, t t , * ---Time, dimensionless time, * w ----Displacement in * z direction, w ---Dimensionless displacement in z direction
منابع مشابه
Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملAnalysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE)
Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...
متن کاملAn Experimental Study on the Tensile Behaviors of Ultrasonic Welded T-joints for Polyamide Composite
In this paper, an experimental investigation on ultrasonic welding of polyamide composites reinforced with glass fiber has been carried out. The effect of ultrasonic welding parameters, such as welding time, air pressure, hold time and the amount of glass fiber in the composite on tensile strength of weld joints were determined using response surface methodology. This methodology was applied fo...
متن کاملEvaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملDiscrepancies Between Free Vibration of FML and Composite Cylindrical Shells Reinforced by CNTs
In this study, discrepancies between the free vibration of fiber-metal laminate (FML) and composite cylindrical shells reinforced by carbon nanotubes (CNTs) based on Love’s first approximation shell theory have been considered by beam modal function model. The representative volume elements consist of three and four phases for composite and FML structures, respectively, which include fiber, CNT...
متن کامل