All ink-jet printed polyfluorene photosensor for high illuminance detection

نویسندگان

  • Leah Lucas Lavery
  • Gregory L. Whiting
  • Ana Claudia Arias
چکیده

An all-printed photosensor based on polyfluorene derivatives has been developed for high illuminance range detection (>100 klux). The active layer is a blend of hole-accepting poly(9,9’-dioctylfluorene-cobis-N,N’-(4-butylphenyl)-bis-N,N’-phenyl-1,4-phenylenediamine) (PFB) and electron-accepting poly(9,9’-dioctylfluorene-co-benzothiadiazole) (F8BT). A top-absorbing architecture was used with poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) as the transparent electrode. The surface energy of the PEDOT:PSS ink was modified in order to allow printing directly onto the hydrophobic surface of the PFB:F8BT blend layer, placing the transparent electrode at the top of the light sensor structure. The all-printed photosensor shows a linear response over multiple measurements within the illuminance range of (100 to 400) klux. *[email protected] + Current address: Department of Electrical Engineering and Computer Sciences, University of California, Berkeley, Berkeley, CA 94720-1770, USA.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ink-Jet Printing Cotton with Cationic Reactive Dye Based Inks

The current commercial application of ink-jet reactive inks to cotton fabrics has been through pre-treating with pad liquor prior to printing. In This study made an effort to provide a single phase ink-jet printing process for printing cotton fabric using the novel cationic reactive dye in ink’s formulation. Cotton fabric was printed upon with the novel cationic reactive dye and commercial anio...

متن کامل

Evaluating the Effect of Reactive Dye’s Structure and Penetrant Type on the Fastness of Ink-Jet Prints

The purpose of this study was to investigate the effect of the reactive dye structure and type of penetrant in ink formulation on paper ink-jet printing. Different type of papers, which have same grammage was printed upon with three commercial reactive dyes, CI Reactive Blue 49 Ink 1, 4, CI Reactive Blue 21 Ink 2, Ink 5 and CI Reactive Blue 19 Ink 3, Ink 6, which are based on different reactive...

متن کامل

Effect of Ink Formulation and Paper Surface Morphology on Ink-jet Printing Properties

The purpose of this study was to investigate the effect of type of alcohols and humectants in inks formulation, and the papers surface morphology on the ink-jet printing properties. In order to investigate the influence of alcohol and humectant types on printing properties, the optimum ink formulation from previous study, which contained C.I. Reactive Blue 21 Ink2 was formulated with different ...

متن کامل

The Effect of Reactive Dye Structure on the Ink-Jet Printing of Cotton

The purpose of this study was to investigate the effect of the structure of reactive dye on cotton ink-jet printing. Cotton fabric was printed upon with three commercial cellulosic reactive dyes which are based on the similar chromophore and possess different numbers of reactive and anionic groups. Colour yield and absorbed dye fixation of the printed cotton were evaluated at various pHs. The i...

متن کامل

Water Fast of Inkjet Print by Using Acrylic /Nano-Silver Ink

A colour ink jet printing with improved water fastness property was produced by using of special component in the ink’s formulation. In this study, the water fastness of ink jet prints which used acrylic/nano-silver resin nano-composite ink instead of conventional resin in ink’s formulation was examined. The nano composite resin was prepared via miniemulsion polymerization of acrylate monomers ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011