Simulation of the Bishop Steam Foam Pilot
نویسنده
چکیده
This paper was selected for presentation by an SPE Program Committee following reviewof Information contained In an abatrwt submitted by the authorfa). Contmrta of the pap aa presented, have nnt bwn reviewed by the society of Petroleum Enginwra and are subject to correction by the author(s). The material, es prewnted, does not newawrlty roft any position of the Society of Petroleum Engbrwrs, Ita officers, or members. Papere presented at SPE mwtings are subject to publication revtew by Edftc”lal Commlttws of the &ole of Petroleum Englnwra. Permission to copy is restricted to an abstract of not more then T ‘I wrds. Illuatratlona may not be copied. The abstract ehoufd contain cwrepkuoue @mwWgmd of whare and by whom the paper is presentad. Write Publications Manager, SPE, PO. BOXSS3#3S, Rlchardaon. TX 7WK+3S36. Telex, 730W9 SPEOAL.
منابع مشابه
Simulation and Optimization of a Naphtha Thermal Cracking Pilot Plant
In thermal cracking plants, it is desired to apply an optimal temperature profile along the reactor to minimize the operation cost. In this article a simulator is developed by the use of a mathematical model, which describes the static operation of a naphtha thermal cracking pilot plant. The model is used to predict the steady state profiles of the gas temperature and product yields. Using ...
متن کاملNumerical Simulation and Optimization Design of the Annular Mechanical Foam Breaker
The annular foam breaker is one which uses the vacuum and shear force generated by the Coanda effect to break foam. The pressure distribution directly affects its performance. So an investigation on the flow characteristics inside the annular foam breaker is important to optimize its structure. In this paper, the computational fluid dynamics (CFD) code, FLUENT, is employed to simulate the flow ...
متن کاملMATHEMATICAL MODELLING OF THE EFFECT OF FOAM DEGRADATION ON MOULD FILLING IN THE GREY IRON EPC PROCESS
In this investigation a new model was developed to calculate gas pressure at the melt/foam interface (Gap) resulting from foam degradation during mould filling in the Lost Foam Casting (LFC) process. Different aspects of the process, such as foam degradation, gas elimination, transient mass, heat transfer, and permeability of the refractory coating were incorporated into this model. A Computati...
متن کاملSHAHAB-A PC-Based Software for Simulation of Steam Cracking Furnaces (Ethane and Naphtha)
SHAHAB is a PC- based simulator developed by Olefin Research Group (ORG), with the simultaneous simulation of the reactor, the firebox, the convection section and the transfer line exchanger in steam Cracking units. The reaction mechanism of thermal cracking of hydrocarbons is generally accepted as free-radical chain reactions. Using a rigorous kinetic model, a complete reaction network for rep...
متن کاملNumerical Simulation and Parametric Study of Forced Convective Condensation in Vertical Channel
Forced convective condensation in vertical channel is investigated numerically. The condensation boundary layers that occur due to temperature difference between the walls and saturation temperature of steam is simulated by the volume of fluid (VOF) method. The effect of variations in the hydraulic diameter, steam velocity, Re number and temperature difference between the wall and saturation te...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1997