Identification and Fine Tuning of Closed-loop Processes under Discrete Ewma and Pi Adjustments
نویسندگان
چکیده
Conventional process identification techniques of a open-loop process use the cross-correlation function between historical values of the process input and of the process output. If the process is operated under a linear feedback controller, however, the cross-correlation function has no information on the process transfer function because of the linear dependency of the process input on the output. In this paper, several circumstances where a closedloop system can be identified by the autocorrelation function of the output are discussed. It is assumed that a proportional integral controller with known parameters is acting on the process while the output data were collected. The disturbance is assumed to be a member of a simple yet useful family of stochastic models, which is able to represent drift. It is shown that, with these general assumptions, it is possible to identify some dynamic process models commonly encountered in manufacturing. After identification, our approach suggests to tune the controller to a near-optimal setting according to a well-known performance criterion. Copyright 2001 John Wiley & Sons, Ltd.
منابع مشابه
A Unified IMC based PI/PID Controller Tuning Approach for Time Delay Processes
This paper proposes a new PI/PID controller tuning method within filtered Smith predictor (FSP) configuration in order to deal with various types of time delay processes including stable, unstable and integrating delay dominant and slow dynamic processes. The proposed PI/PID controller is designed based on the IMC principle and is tuned using a new constraint and without requiring any approxima...
متن کاملClosed-Loop Disturbance Identification and Controller Tuning for Discrete Manufacturing Processes
متن کامل
Robust PI based set-point learning control for batch processes subject to time- varying uncertainties and load disturbance
Based on the proportional-integral (PI) closed-loop control widely used in industrial engineering practice, a robust iterative learning control (ILC) method is proposed for industrial batch processes subject to time-varying uncertainties and load disturbance. An important merit is that the proposed ILC design is independent of the PI tuning which maintains the closed-loop system stability, owin...
متن کاملComparison of some tuning methods for integrating processes
There are several tuning methods available for PI controllers. The Magnitude Optimum Multiple Integration (MOMI) tuning method results in a very good closed-loop response for a large class of process models. The method calculates the PI controller parameters from the process model or from the open-loop or the closed-loop time response of the process. Recently, the MOMI tuning method has been ex...
متن کاملClosed-loop model identification and PID/PI tuning for robust anti-slug control
Active control of the production choke valve is the recommended solution to prevent severe slugging flow at offshore oilfields. This requires operation in an open-loop unstable operating point. It is possible to use PI or PID controllers which are the preferred choice in the industry, but they need to be tuned appropriately for robustness against plant changes and large inflow disturbances. The...
متن کامل