Evaluation of Fiber Reinforced Cement Using Digital Image Correlation
نویسندگان
چکیده
The effect of short fiber reinforcements on the mechanical properties of cement has been examined using a splitting tensile - digital image correlation (DIC) measurement method. Three short fiber reinforcement materials have been used in this study: fiberglass, nylon, and polypropylene. The method outlined provides a simple experimental setup that can be used to evaluate the ultimate tensile strength of brittle materials as well as measure the full field strain across the surface of the splitting tensile test cylindrical specimen. Since the DIC measurement technique is a contact free measurement this method can be used to assess sample failure.
منابع مشابه
Characterization of Fiber-reinforced Cement Composites by Their Tensile Stress- Strain Behavior and Quantification of Crack Formation
The behavior of fiber reinforced cement composites (FRCC) can be described and quantified by a variety of parameters, such as strength and strain capacity, toughness index, and fracture energy, obtained from tests in tension or bending in a large number different configurations including varying specimen geometries and test setups. Depending on the details of the individual testing procedures, ...
متن کاملImproved Sectional Image Analysis Technique for Evaluating Fiber Orientations in Fiber-Reinforced Cement-Based Materials
The distribution of fiber orientation is an important factor in determining the mechanical properties of fiber-reinforced concrete. This study proposes a new image analysis technique for improving the evaluation accuracy of fiber orientation distribution in the sectional image of fiber-reinforced concrete. A series of tests on the accuracy of fiber detection and the estimation performance of fi...
متن کاملApplication of Digital Image Correlation Technique on Vacuum Assisted Resin Transfer Molding Process and Performance Evaluation of the Produced Materials
Vacuum assisted resin transfer moulding (VARTM) is a promising manufacture process for making large and complex fiber reinforced composite structures. However, the complexity of the flow of the resin in the infusion stage usually leads to nonuniform property distribution of the produced composite part. In order to control the flow of the resin, the situation of flow should be mastered. For the ...
متن کاملExperimental Strengthening of the Two-way Reinforced Concrete Slabs with High Performance Fiber Reinforced Cement Composites Prefabricated Sheets
Reinforced concrete structures need to be strengthened and retrofitted for various reasons, including errors during design and/or construction, so in most cases strengthening of structural elements is much more economical than rebuilding the structure. Using HPFRCC with tensile stiffening behavior has been developed to strengthen the concrete structures over the recent few years. In this paper,...
متن کاملPalm kernel fruit fiber reinforced gypsum-cement based wall panels: It’s physical and mechanical characteristics
Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...
متن کامل