Synthesis and Hydrolytic Degradation of Substituted Poly(DL-Lactic Acid)s

نویسندگان

  • Hideto Tsuji
  • Takehiko Eto
  • Yuzuru Sakamoto
چکیده

Non-substituted racemic poly(DL-lactic acid) (PLA) and substituted racemic poly(DL-lactic acid)s or poly(DL-2-hydroxyalkanoic acid)s with different side-chain lengths, i.e., poly(DL-2-hydroxybutanoic acid) (PBA), poly(DL-2-hydroxyhexanoic acid) (PHA), and poly(DL-2-hydroxydecanoic acid) (PDA) were synthesized by acid-catalyzed polycondensation of DL-lactic acid (LA), DL-2-hydroxybutanoic acid (BA), DL-2-hydroxyhexanoic acid (HA), and DL-2-hydroxydecanoic acid (DA), respectively. The hydrolytic degradation behavior was investigated in phosphate-buffered solution at 80 and 37 °C by gravimetry and gel permeation chromatography. It was found that the reactivity of monomers during polycondensation as monitored by the degree of polymerization (DP) decreased in the following order: LA > DA > BA > HA. The hydrolytic degradation rate traced by DP and weight loss at 80 °C decreased in the following order: PLA > PDA > PHA > PBA and that monitored by DP at 37 °C decreased in the following order: PLA > PDA > PBA > PHA. LA and PLA had the highest reactivity during polymerization and hydrolytic degradation rate, respectively, and were followed by DA and PDA. BA, HA, PBA, and PHA had the lowest reactivity during polymerization and hydrolytic degradation rate. The findings of the present study strongly suggest that inter-chain interactions play a major role in the reactivity of non-substituted and substituted LA monomers and degradation rate of the non-substituted and substituted PLA, along with steric hindrance of the side chains as can be expected.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Change in thermal transitions and water uptakes of poly(l-lactic acid) blends upon hydrolytic degradation

This article reports experimental data related to the research article entitled "Poly(malic acid-co-l-lactide) as a Superb Degradation Accelerator for Poly(l-lactic acid) at Physiological Conditions" (H.T. Oyama, D. Tanishima, S. Maekawa, 2016) [1]. Hydrolytic degradation of poly(l-lactic acid) (PLLA) blends with poly(aspartic acid-co-l-lactide) (PAL) and poly(malic acid-co-l-lactide) (PML) oli...

متن کامل

Formulation and Control of Biodegradable Injectable in Situ Gelling System of Levonorgestrel

The aim of this study was to develop a new polymeric gel that used as a contraceptive system.Polymeric gel has been studied extensively for drug delivery systems. In this article, thermalsensitive poly (DL-lactic acid)-poly (ethylene glycol) poly (DL-lactic acid) (PLA-PEG-PLA) hydrogel was used as an implantable contraceptive system.Aqueous solution of this copolymer fromed a free flowing so at...

متن کامل

Poly (Lactic Acid)Nanofibres as Drug Delivery Systems: Opportunities and Challenges

Numerous Scientists have discovered the procedure of nanotechnology, explicitlynanofibers, asdrug delivery systems for transdermal uses. Nanofibers canbe used to deliver drugs and are capable of controlled release for a continued periodof time. Poly (Lactic Acid) (PLA) is the lastly interesting employed synthetic polymer in biomedical application owing to its well categorized biodegradable prop...

متن کامل

In vivo and in vitro degradation of glycine/DL-lactic acid copolymers.

A series of copolymers of glycine and DL-lactic acid with various compositions was synthesized and their in vivo and in vitro degradation behavior was studied. For the in vivo examination, discs of the copolymer films were subcutaneously implanted in rats. The in vitro studies were carried out in phosphate buffer at pH = 7.4 and 37 degrees C. The decrease in molecular weight, the loss of weight...

متن کامل

Effects of lactide monomer on the hydrolytic degradation of poly(lactide-co-glycolide) 85L/15G.

The hydrolytic degradation of oriented poly(L-lactide-co-glycolide) 85 L/15 G (PLGA 85/15) sample materials with various amounts of lactide monomer was monitored in vitro at 37 °C. The materials were manufactured from medical grade PLGA 85/15 by a two-step melt extrusion-die drawing process. Results showed that the hydrolytic degradation rate depended highly on the lactide monomer content, whic...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 4  شماره 

صفحات  -

تاریخ انتشار 2011