High impact force attenuation of reinforced concrete systems
نویسندگان
چکیده
This paper presents the application of smart control technology to reinforced concrete systems for high impact force attenuation. The smart reinforced control system is developed through the integration of reinforced concrete beams, smart control devices, sensors, and signal processors. Various combinations of input and output signals are applied to the smart reinforced concrete beams: impact forces and current signals are used as input signals while accelerations and displacements are used as output signals. Based on the set of input-output signals, a nonparametric model is developed to predict the nonlinear behaviour of smart concrete beam systems. It is demonstrated from the experimental studies that the proposed model is effective in predicting the nonlinear impact responses of the reinforced concrete systems.
منابع مشابه
Impact of High Strength Rebars on Seismic Behavior of Lightly Reinforced Boundary Elements
Considering economical reasons and attempting to reduce carbon foot print of concrete structures, there is increasing tendency toward use of high strength reinforcement in seismically active regions. ACI 318-19, Iranian steel rebars standard INSO 3132 and next edition of Iranian national building allow the use of high strength rebars in elements of ductile force resisting systems. Therefore it ...
متن کاملEvaluation of Seismic Vulnerability of Reinforced Concrete Buildings Adjacent to the Deep Excavations
In this study, the effect of deep excavation on the seismic response of RC moment resisting building systems has been studied. Deep excavation can cause significant changes in the stress and strain levels of soil environment and also changes in the propagation of seismic waves. This leads to permanent displacements in the foundation system. In this study, three RC building systems, i.e. 5, 10, ...
متن کاملExperimental study of impact strength and modulus of elasticity of reinforced concrete under ambient temperature, used in concrete dams
The choice of concrete consumption and high strength in the structure of concrete dams is of particular importance. In this laboratory research, slag alkaline concrete containing 0, 4 and 8% nanosilica and 1 and 2% polyolefin fibers has been produced in 5 mixing designs. A design of control concrete containing Portland cement was prepared to compare with the test results of reinforced concre...
متن کاملAnalytical and numerical modeling of erosive projectiles into steel fiber reinforced concrete target
In this paper, modeling of high speed projectiles with different nose shapes, penetrating into steel fiber reinforced concrete is investigated. This is a novel study because it considers the length to diameter ratio of steel fiber as well as projectile length to diameter ratio and volume fraction of fiber used in concrete matrix on the impact resistance of steel fiber reinforced concrete fibers...
متن کاملShear Capacity of Reinforced Concrete Flat Slabs Made with High-strength Concrete: A Numerical Study of the Effect of Size, Location, and Shape of the Opening (TECHNICAL NOTE)
Nowadays, concrete with strength higher than 50 MPa is utilized due to the ever increasing need for higher strength and prolonged healing properties. Despite the widespread use of high-strength concrete, only a few research projects have been conducted on the punching shear strength of high-strength concrete slabs. Reinforced concrete flat slabs are widely employed in structural systems. The lo...
متن کامل