Studies on electric-discharge machining of non-contact seal face grooves
نویسندگان
چکیده
In this paper, the electric-discharge machining (EDM) of non-contact seal grooves was studied. Two types of material, namely: tungsten carbide and silicon carbide were tested by EDM due to their hard machining behaviors. The geometry of seal grooves is another reason why grinding or other precision machining processes cannot be applied. Four parameters of EDM processes were studied, namely: electrode material, pulse duration, discharge current, and polarity. According to experimental results, the optimal process parameters were obtained based on the specimen’s qualities, such as surface roughness and depth of cut. An industrial example was also studied in the final stage of the proposed paper. © 2003 Elsevier B.V. All rights reserved.
منابع مشابه
Experimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کاملPongamia pinnata Plant Seed Oil as Dielectric Fluid for Electro Discharge Machining Process
Electro Discharge Machining (EDM) is a noticeable machining practice among created unconventional machining procedures for intricate, complex profiles in "hard to machine" materials, similar to heat-treated steels, composites, superalloys, ceramics, composites, carbides, and so on. In EDM, the material expulsion of the cathode is accomplished through precise controlled electric discharge (the s...
متن کاملIntelligent Knowledge Based System Approach for Optimization of Design and Manufacturing Process for Wire-Electrical Discharge Machining
Wire electrical discharge machining (WEDM) is a method to cut conductive materials with a thin electrode that follows a programmed path. The electrode is a thin wire. Typical diameters range from .004" - .012" (.10mm - .30mm) although smaller and larger diameters are available. WEDM is a thermal machining process capable of accurately machining parts with varying hardness or complex shapes. WED...
متن کاملIntelligent Knowledge Based System Approach for Optimization of Design and Manufacturing Process for Wire-Electrical Discharge Machining
Wire electrical discharge machining (WEDM) is a method to cut conductive materials with a thin electrode that follows a programmed path. The electrode is a thin wire. Typical diameters range from .004" - .012" (.10mm - .30mm) although smaller and larger diameters are available. WEDM is a thermal machining process capable of accurately machining parts with varying hardness or complex shapes. WED...
متن کاملOptimisation of wire-cut EDM process parameter by Grey-based response surface methodology
Wire electric discharge machining (WEDM) is one of the advanced machining processes. Response surface methodology coupled with Grey relation analysis method has been proposed and used to optimise the machining parameters of WEDM. A face centred cubic design is used for conducting experiments on high speed steel (HSS) M2 grade workpiece material. The regression model of significant factors such ...
متن کامل