Origin of photovoltaic effect in superconducting YBa2Cu3O6.96 ceramics
نویسندگان
چکیده
We report remarkable photovoltaic effect in YBa2Cu3O6.96 (YBCO) ceramic between 50 and 300 K induced by blue-laser illumination, which is directly related to the superconductivity of YBCO and the YBCO-metallic electrode interface. There is a polarity reversal for the open circuit voltage Voc and short circuit current Isc when YBCO undergoes a transition from superconducting to resistive state. We show that there exists an electrical potential across the superconductor-normal metal interface, which provides the separation force for the photo-induced electron-hole pairs. This interface potential directs from YBCO to the metal electrode when YBCO is superconducting and switches to the opposite direction when YBCO becomes nonsuperconducting. The origin of the potential may be readily associated with the proximity effect at metal-superconductor interface when YBCO is superconducting and its value is estimated to be ~10(-8) mV at 50 K with a laser intensity of 502 mW/cm(2). Combination of a p-type material YBCO at normal state with an n-type material Ag-paste forms a quasi-pn junction which is responsible for the photovoltaic behavior of YBCO ceramics at high temperatures. Our findings may pave the way to new applications of photon-electronic devices and shed further light on the proximity effect at the superconductor-metal interface.
منابع مشابه
Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications
Porous silicon was successfully prepared using metal-assisted chemical etching method. The Effect of HF/H2O2 concentration in etching solution as an affecting parameter on the prepared porosity type and size was investigated. Field emission electron microscopy (FE-SEM) confirmed that all etched samples had porous structure and the sample which was immersed into HF/H2O2 withmolar ratio of 7/3.53...
متن کاملIntercalated Nanocomposites Based on High-Temperature Superconducting Ceramics and Their Properties
High temperature superconducting (SC) nanocomposites based on SC ceramics and various polymeric binders were prepared. Regardless of the size of the ceramics’ grains, the increase of their amount leads to an increase of resistance to rupture and modulus and a decrease in limiting deformation, whereas an increase in the average ceramic grain size worsens resistance properties. The SC, thermo-che...
متن کاملEffects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance
Cadmium sulfide (CdS) photosensitizers were successfully formed on the mesoporous titania films using the successive ionic layer adsorption and reaction (SILAR) method in five cycles, and the effects of particles size distribution and their occupied surface area on the morphology, topography, optical property, and photovoltaic performance were investigated. Scanning electron microscope (SEM) im...
متن کاملResistive Hom Load for Superconducting Cavities*
Ferrites and lossy ceramics, used in HOM (higher order mode) loads for superconducting accelerators, have shortcomings such as poor batch-to-batch reproducibility of electromagnetic properties, extremely low electric conductivity at cryogenic temperatures leading to accumulation of charge on the material surface, brittleness, which may cause contamination of the nearby SRF cavities by lossy dus...
متن کاملعلائم ابررسانایی دانهای و اثرهای جوزفسون در اندازهگیریهای ماکروسکوپی: ابررساناهای جدید
We report systematic investigations of the magnetic superconducting properties of the new superconducting materials (NS): New high temperature superconductors (HTS), Organic superconductors (OS), fullerenes, carbon nanotubes, MgB2 etc. We show that, contrary to conventional superconductors where the superconducting state can be coherent over several tenths of km, the macroscopic coherence ran...
متن کامل