Real-time locating and speed measurement of fibre fuse using optical frequency-domain reflectometry

نویسندگان

  • Shoulin Jiang
  • Lin Ma
  • Xinyu Fan
  • Bin Wang
  • Zuyuan He
چکیده

We propose and experimentally demonstrate real-time locating and speed measurement of fibre fuse by analysing the Doppler shift of reflected light using optical frequency-domain reflectometry (OFDR). Our method can detect the start of a fibre fuse within 200 ms which is equivalent to a propagation distance of about 10 cm in standard single-mode fibre. We successfully measured instantaneous speed of propagating fibre fuses and observed their subtle fluctuation owing to the laser power instability. The resolution achieved for speed measurement in our demonstration is 1 × 10(-3) m/s. We studied the fibre fuse propagation speed dependence on the launched power in different fibres. Our method is promising for both real time fibre fuse monitoring and future studies on its propagation and termination.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Distributed Rayleigh scatter dynamic strain sensing above the scan rate with optical frequency domain reflectometry

Luna recently demonstrated a novel optical phase-based algorithm for removing the adverse effects of fiber motion at frequencies far above the scan rate on high-resolution measurements of Rayleigh scatter using Optical Frequency Domain Reflectometry (OFDR) for static strain and temperature measurements. By comparing dynamic OFDR Rayleigh scatter measurements to a static reference, it is possibl...

متن کامل

Distributed optical fibre sensing at 1.65μm using a Q-switched fibre laser

It is becoming increasingly vital to monitor telecommunication links during operation and installation process. By using a high peak power source and the optical time domain reflectometry (OTDR) technique operating at the wavelength region of 1.6μm, it is possible to monitor conventional C-band Erbium-doped fibre amplifier (EDFA) systems whilst transmitting data, and to characterise losses at t...

متن کامل

Design and Characterization of a 10 GHz Organic BGA Package

The design and electrical characterization of an organic BGA flip-chip package for >10 GHz operation is described. A comprehensive overview of the design process is given, including selection of substrate technology, layout strategy, electromagnetic modeling of critical signal paths, and thermal analysis. Test methods and hardware used to evaluate the frequency-domain and timedomain behaviors o...

متن کامل

Polarization resolved measurement of Rayleigh backscatter in fiber-optic components

Fiber-optic components, modules and assemblies for modern networking applications are becoming more complex. At the component and module level, failures such as bad splices, bends, crimps, and other nonreflective events can be extremely difficult to locate and troubleshoot. The available measurement techniques designed to identify these types of failures fall into two basic categories: optical ...

متن کامل

Detection of Solvents using a Distributed Fibre Optic Sensor

Introduction: In this Letter an optical fibre sensor capable of making fully distributed measurements of a wide range of solvents is identified. Microbending principles have been used to develop the sensor such that it responds on contact with liquid solvents, typically within 30 seconds of exposure. The sensor incorporates a swelling polymer and optical fibre components that are readily availa...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2016