Automatic Wear Measurement of Ti-Based Coatings Milling via Image Registration
نویسندگان
چکیده
the purpose of this research is to use the machine vision, and combine with image registration mutual informationspatial transformation technique for the automatic wear measurement of Ti-Base coated milling. Provide on-line detecting the mill state during the milling processes in order to obtain a better surface quality. The experimental results indicated that the TiAlN-surface multilayer coated mill had the best performance under the different milling conditions.
منابع مشابه
Experiments and finite element simulations on micro-milling of Ti–6Al–4V alloy with uncoated and cBN coated micro-tools
This paperpresentsexperimental investigationsandfinite element simulationsonmicro-millingofTi–6Al– 4V alloy with fine grain uncoated and cBN coated micro-end mills. Micro-milling of Ti–6Al–4V using uncoated and cBN coated tungsten carbide micro-end mills are conducted; surface roughness, burr formation and tool wear are measured. Effects of machining parameters on surface roughness, burr format...
متن کاملCOMPARISON OF THE CrN , TiN AND (Ti, Cr)N PVD COATINGS DEPOSITED BY CATHODIC ARC EVAPORATION
In the present study, CrN, TiN and (Ti, Cr)N coatings were deposited on D6 tool steel substrates. Physical and mechanical properties of coatings such as microstructure, thickness, phase composition, and hardness were evaluated. Phase compositions were studies by X-ray diffraction method. Mechanical properties were determined by nano-indentation technique. The friction and wear behaviour of the ...
متن کاملHigh Energy Ball Milling - a Promising Route for Production of Tailored Thermal Spray Consumables
The high energy ball milling technique permits production of composite powders suitable for application in thermal spray processes. Different milling systems are compared concerning their potential for production of composite powder feedstock for spraying processes. Hard phase materials like carbides or oxides are incorporated into various metallic matrices including light weight alloys based o...
متن کاملSurvey and Study of Machinability for Titanium Alloy Ti-6Al-4V through Chip Formation in Milling Process
Most of the materials used in the industry of aero-engine components generally consist of titanium alloys. Advanced materials, because of their excellent combination of high specific strength, light weight and general corrosion resistance. In fact, chemical wear resistance of aero-engine alloy provides a serious challenge for cutting tool material during the machining process. The reduction in ...
متن کاملSurvey and Study of Machinability for Titanium Alloy Ti-6Al-4V through Chip Formation in Milling Process
Most of the materials used in the industry of aero-engine components generally consist of titanium alloys. Advanced materials, because of their excellent combination of high specific strength, light weight and general corrosion resistance. In fact, chemical wear resistance of aero-engine alloy provides a serious challenge for cutting tool material during the machining process. The reduction in ...
متن کامل