Reduction of infrasounds in machines with hydrostatic drive.

نویسندگان

  • Zygmunt Kudźma
  • Michał Stosiak
چکیده

Some hazards posed by the operation of hydraulic systems, connected with low-frequency vibrations and noise are presented. Special attention is focused on infrasounds. The sources of low-frequency vibrations and noise and ways of reducing them are indicated. An original solution ensuring the effective reduction of vibrations and noise in a wide frequency range, i.e., a wide-band damper of pressure fluctuations, also performing the function of an acoustic filter, is proposed. The effectiveness of the damper was confirmed by the results of laboratory tests and tests carried out on engineering machines working in real conditions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultrasound-Guided Hydrostatic Reduction of Childhood Intussusceptions Using Water Enema

Conventional hydrostatic barium reduction or pneumatic reduction of intussusception is associated with considerable ionizing radiation. The aim of this study was to evaluate ultrasound-guided hydrostatic reduction for childhood intussusception using water enema. A total of 76 children who diagnosed as having intussusception were referred to Doctor Sheikh Children Hospital in Mashhad (northeast ...

متن کامل

The Vector Control of Three-Phase Salient Pole Synchronous Machines Supplied by Pulse-Width- Modulated Voltage Source Inverters

In this paper, computer simulation of a three-phase synchronous motor drive is described. This drive/system is supplied with a new type of pulse-width modulated voltage source inverter (PWM VSI) whose amplitude of the first harmonic, compared to a conventional sinusoidal PWM VSI, is increased by about 17% and whose amplitude of higher harmonics is also reduced inversely proportional to their or...

متن کامل

The Vector Control of Three-Phase Salient Pole Synchronous Machines Supplied by Pulse-Width- Modulated Voltage Source Inverters

In this paper, computer simulation of a three-phase synchronous motor drive is described. This drive/system is supplied with a new type of pulse-width modulated voltage source inverter (PWM VSI) whose amplitude of the first harmonic, compared to a conventional sinusoidal PWM VSI, is increased by about 17% and whose amplitude of higher harmonics is also reduced inversely proportional to their or...

متن کامل

Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts

The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...

متن کامل

Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts

The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Acta of bioengineering and biomechanics

دوره 15 2  شماره 

صفحات  -

تاریخ انتشار 2013