Disturbance Response of Two-Link Underactuated Serial-Link Chains
نویسندگان
چکیده
In an attempt to improve the performance of underactuated robotic hands in grasping, we investigate the influence of the underlying coupling mechanism on the robustness of underactuated hands to external disturbance. The coupling mechanisms used in underactuated mechanisms can be divided into two main classes based on the self-adaptive transmission used to route actuation to the degrees of freedom, namely single-acting and double-acting transmissions. The kinematic coupling constraint is always active in double-acting mechanisms, while there are specific combinations of external disturbances and mechanism parameters that render the constraint inactive in single-acting mechanisms. This paper identifies unique behaviors in terms of mechanism reconfiguration and variation in grasping contact forces that result from the underactuated hand’s response to external disturbance forces and show that these behaviors are a function of the coupling mechanism, actuation mode, and contact constraints. We then present an analysis of how these behaviors influence grasping ability of the hand and discuss implications for underactuated hand design and operation. [DOI: 10.1115/1.4006279]
منابع مشابه
Experimental control of a flexible link by the method of Controlled Lagrangian
The Controlled Lagrangian method is a branch of energy shaping methods that is designed to control underactuated mechanical systems. The method emp...
متن کاملEffect of Link Slab on Seismic Response of Two Span Straight and Skew Bridges
Highway bridges are frequently constructed as simple span structures with steel or concrete girders and a cast-in-place concrete deck, spanning from one pier to another. At each end of the simple span deck, a joint is provided for deck movement due to temperature, shrinkage, and creep. Bridge deck joints are expensive and pose many problems with regard to bridge maintenance. Elimination of deck...
متن کاملadaptive control of two-link robot manipulator based on the feedback linearization method and the proposed neural network
This paper proposes an adaptive control method based on the feedback linearization technique and a proposed neural network, for tracking and position control of an industrial manipulator. At first, it is assumed that the dynamics of the system are known and the control signal is constructed by the feedback linearization method. Then to eliminate the effects of the uncertainties and external d...
متن کاملA New Topology for Dynamic Voltage Restorer Using High Frequency Link
In this paper a new topology for Dynamic Voltage Restorer (DVR) with high frequency link is proposed. This topology is able to compensate different types of voltage disturbances such as voltage sag, voltage swell and voltage harmonics. According to the obtained equations, this topology operates as a controllable current source to charge the series capacitor. Due to using High Frequency Transfor...
متن کاملGlobal stabilization of underactuated spring-coupled three-link horizontal manipulator using position measurements only
This paper concerns the global stabilization of an underactuated spring-coupled three-link horizontal manipulator (STHM), which is an underactuated mechanical system (UMS) with two actuators and three degrees of freedom (DOF). A new control method is developed that asymptotically stabilizes the STHM at the origin using the position measurements of the manipulator only. First, we introduce a hom...
متن کامل