Novel Off-Line Zero-Voltage-Switching PWM AC/DC Converter for Direct Conversion from AC Line to 48VDC Bus with Power Factor Correction
نویسندگان
چکیده
A novel off-line zero-voltage-switching(ZVS) PWM A C D C converter for single stage preregulation in distributed power system is proposed. The proposed A W C converter provides both of input power factor correction and direct conversion from 110-220VAC line to 48VDC bus with single power stage. Comparing to the conventional two-stage approach(boost rectifier followed by off-line DC/DC step down converter), the proposed approach reduces the loss of one power stage. A new simple auxiliary circuit provides zero-voltage-switching(ZVS) condition to all semiconductor devices without imposing additional voltage and current stresses and loss of PWM capability. Operational principle, analysis, control of the proposed converter together with the simulation results of 1KW prototype are presented.
منابع مشابه
Multi-Stage DC-AC Converter Based on new DC-DC converter for energy conversion
This paper proposes a multi-stage power generation system suitable for renewable energy sources, which is composed of a DC-DC power converter and a three-phase inverter. The DC-DC power converter is a boost converter to convert the output voltage of the DC source into two voltage sources. The DC-DC converter has two switches operates like a continuous conduction mode. The input current of DC-DC...
متن کاملApplication of SVM Technique for Three Phase Three Leg Ac/Ac Converter Topology
Ac–ac power conversion, the most popular topologies are indirect ac–ac converters with a dc link matrix converters and direct pulse width modulation (PWM) ac–ac converters. The indirect ac–ac converters and matrix converters can provide variable output voltage and variable frequency. However, for applications, where only voltage regulation is needed, the direct PWM ac–ac converters are used to ...
متن کاملAnalysis and Design of a New AC-DC Single-Stage Full-Bridge PWM Converter With Two Controllers
Single phase power factor correction ac-dc converters are widely used in industry for ac-dc power conversion from single phase ac mains to an required output dc voltage. In case of high power application these types of converter use an ac-dc boost converter followed by dc-dc converter. These converters has the features of excellent input power factor, continuous input and output currents, and i...
متن کاملAn Isolated Off-Line High Power Factor Electrolytic Capacitor-Less LED Driver with Pulsating Output Current
One of the most efficient lighting technology is based on light-emitting diodes (LEDs). Common LED drivers with AC-input (50-60Hz) usually require a bulk electrolytic capacitor to decrease low-frequency ripple in the output. However, the critical element that limits the lifespan of the LED driver is the electrolytic capacitor. An isolated off-line LED driver is proposed in this paper, in which ...
متن کاملAn AC/DC PFC Converter with Active Soft Switching Technique
This paper proposes an AC-DC converter with the application of active type soft switching techniques. Boost converter with active snubber is used to achieve power factor correction. Boost converter main switch uses Zero Voltage Transition switching for turn on and Zero Current Transition switching for turn off. The active snubber auxillary switch uses Zero Current Switching for both turn on and...
متن کامل