Blast Performance of Four Armour Materials
نویسندگان
چکیده
This investigation compared four conventional vehicle armour materials for performance under blast loading. The parameters measured were resistance to deformation, mechanical toughness and metallurgical microstructure. It was found that two of these, the M steel and A steel, showed the least deformation and M steel showed better shock energy absorption. B steel had high toughness but showed significant deformation under blast loading; particularly when subjected to multiple hits. H steel showed intermediate properties between M steel and B steel. It is concluded that M and A steels provide the best performance for use on vehicles that may be subjected to explosive charges. RELEASE LIMITATION Approved for Public Release
منابع مشابه
The Pre-Blast Concept for use on Armour Materials
It can sometimes be difficult to determine whether vehicles damaged by blast loading are repairable in theatre or so significantly damaged that the hulls must be scrapped. The primary purpose of this investigation is to provide basic metallurgical data to assist in determining the criteria of failure. On top of this, it may be possible that blast loading may actually improve the performance of ...
متن کاملL Cannon. Behind Armour Blunt Trauma - An Emerging Problem.
Behind Armour Blunt Trauma (BABT) is the non-penetrating injury resulting from the rapid deformation of armours covering the body. The deformation of the surface of an armour in contact with the body wall arises from the impact of a bullet or other projectile on its front face. The deformation is part of the retardation and energy absorbing process that captures the projectile. In extreme circu...
متن کاملFuture Armour materials and technologies for combat platforms
The ultimate goal of armour research is to create better armour for battle worthy combat plat forms such as main battle tanks, infantry combat vehicles and light combat vehicles. In each of these applications, the main aim boils down to one of the two things; either reduce the weight without sacrificing protection or enhance the performance at same or even reduced weight. In practice, these amb...
متن کاملDynamic Response and Optimal Design of Curved Metallic Sandwich Panels under Blast Loading
It is important to understand the effect of curvature on the blast response of curved structures so as to seek the optimal configurations of such structures with improved blast resistance. In this study, the dynamic response and protective performance of a type of curved metallic sandwich panel subjected to air blast loading were examined using LS-DYNA. The numerical methods were validated usin...
متن کاملAnalysis of 828 servicemen killed or injured by explosion in Northern Ireland 1970-84: the Hostile Action Casualty System.
Death and injury due to terrorist bombings continue to exercise civilian and military surgeons alike. In this paper 828 servicemen killed and injured by explosions in Northern Ireland have been studied, using data stored in the Hostile Action Casualty System (HACS). Because of the nature of the conflict in Northern Ireland, the magnitude of each explosion and the distance of the victims from it...
متن کامل