Analysis of Rail Gun Key Parameters Using Finite Element Analysis Technique
ثبت نشده
چکیده
The rail gun is an electromagnetic device that converts electrical energy into mechanical energy for accelerating the projectile to hypervelocity. In order to accelerate the projectile between the conducting rails, it uses the magnetic field generated by the rail current. The rail gun consists of two parallel conductors called the rails that are bridged by a non-ferromagnetic conductor called a projectile. A simple graphical representation of rail gun is shown in Figure 3.1.
منابع مشابه
Numerical Investigation of Rail Bending Behaviour Focusing on the Effect of Track Modulus
Thorough understanding of steel rail response to wheel load is a key step towards design and evaluation of the railway track structure. In current practice, maximum vertical deflection and bending moment are calculated using the theory of infinite beam on continuous elastic foundation (Winkler model), in which the foundation stiffness is assumed as constant. However, variation of track modulus ...
متن کاملPARAMETRIC STUDY ON RAILWAY FASTENING SYSTEM RESPONSE SUBJECTED TO DIFFERENT AXLE LOAD
There are several factors causing fastening systems to deteriorate faster than the designed life. The high repetitive loads from a moving train being one of the main factors, track irregularities, design and installation defects of track components, non-uniform rail support stiffness, unevenness in the rail seat deterioration are some of the factors causing fastenings systems to deteriorate fas...
متن کاملPattern of Residual Stress in Rail by FEM Analysis and Strain Gage Sectioning Technique
Final step of rail manufacturing is cold rolling straightening process and it hassignificant effects on mechanical properties, straightness, flatness and development of residualstresses. Measurement of residual stresses after straightening process is obligated by railmanufacturing standards. In the present investigation, an attempt has been made to evaluateresidual stresses after straightening ...
متن کاملAnalysis of Strain Inhomogeneity in Vortex Extrusion using Finite Element Method and Response Surface Methodology
The effect of geometrical parameters involved in vortex extrusion (VE) die design, on AA1050 aluminium alloy processed by VE were investigated using finite element analysis (FEA) and response surface methodology (RSM). For this, VE die length (L), reduction in area (RA), twist angle , and position of control points in Beziers' formulation (C1) were considered as input parameters and strain inho...
متن کاملUpdating finite element model using frequency domain decomposition method and bees algorithm
The following study deals with the updating the finite element model of structures using the operational modal analysis. The updating process uses an evolutionary optimization algorithm, namely bees algorithm which applies instinctive behavior of honeybees for finding food sources. To determine the uncertain updated parameters such as geometry and material properties of the structure, local and...
متن کامل