Dynamic Simulation of a High Pressure Regulator
نویسندگان
چکیده
In this paper, the dynamic simulation for a high pressure regulator is performed to obtain the regulator behavior. To analyze the regulator performance, the equation of motion for inner parts, the continuity equation for diverse chambers and the equation for mass flow rate were derived. Because of nonlinearity and coupling, these equations are solved using numerical methods and the results are presented. Additionally, the dynamic analysis results consist of the output pressure change versus time, the displacement of the moving parts versus time, the regulator mass flow rate versus time and the output pressure versus mass flow rate in different controlling spring pre-loads. Furthermore, the sensitivity analysis is carried out and the main parameters affecting the regulator performance are identified. Finally, the results of the dynamic simulation are validated by comparing them with the experimental results.
منابع مشابه
DYNAMIC SIMULATION OF A HIGH PRESSURE REGULATOR
In this paper, the dynamic simulation for a high pressure regulator is performed to obtain the regulator behavior. To analyze the regulator performance, the equation of motion for inner parts, the continuity equation for diverse chambers and the equation for mass flow rate were derived. Because of nonlinearity and coupling, these equations are solved using numerical methods and the results are ...
متن کاملA Novel Dynamic Voltage Regulator with a Multi-level AC/AC Converter
This article proposed a novel topology of dynamic voltage regulator using transformer and PWM multi-level AC/AC converter. In this paper for finding the best value of duty ratio for switches to minimize the THD, the GA algorithm has been used and THD output voltage is assumed to be fitness function. The proposed voltage regulator employs multi-level AC/AC converter to generate compensation volt...
متن کاملFracture Dynamic Propagation Model of High-Energy Gas Fracturing for Casing Perforated Well
The onshore oil and natural gas industries of China have started a large-scale development when crude oil reserves have been difficult to recover. The stratum fracture modification is an indispensable measure to efficiently develop oil and gas fields. Hydraulic fracturing is the most important reservoir stimulation technique, but it is still faced with various problems such as the failure to fr...
متن کاملA Fully Integrated Method for Dynamic Rock Type Characterization Development in One of Iranian Off-Shore Oil Reservoir
Rock selection in modeling and simulation studies is usually based on two techniques; routinely defined rock types and those defined by special core analysis (SCAL). The challenge in utilizing these two techniques is that they are frequently assumed to be the same, but in practice, static rock-types (routinely defined) are not always representative of dynamic rock-types (SCAL defined) in the re...
متن کاملInvestigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model
In recent years energy shortage and environmental impacts due to consuming fossil fuels have led to developing renewable energy sources systems. Since these sources are not reliable and are usually time dependent, an energy storing system like hydrogen production is required. In this regard, PEM electrolyzer can be efficiently used to decompose liquid water into hydrogen and oxygen. Because of ...
متن کامل