A Low-Complexity High-Performance Bluetooth Receiver
نویسندگان
چکیده
This paper presents an implementation of a GFSK receiver based on matched filtering of a sequence of successive bits. This enables improved detection and superior BER performance but requires matched filters of considerable complexity. Exploiting redundancy, and performing phase propagation of successive single-bit stages, we propose a new receiver structure of low complexity. Simulation results presented highlight the benefits of proposed method in terms of computational cost and performance compared to standard methods.
منابع مشابه
A high-performance, efficient, and reliable receiver for Bluetooth signals
FACULTY OF ENGINEERING AND APPLIED SCIENCE SCHOOL OF ELECTRONICS AND COMPUTER SCIENCE Doctor of Philosophy A High-Performance, Efficient, and Reliable Receiver for Bluetooth Signals By Charles Tibenderana The key defining feature of a software defined radio is the flexibility to reconfigure itself to different modes, frequency bands, or wireless standards. This is achieved by, for example, runn...
متن کاملInvestigation of Offset Recovery Algorithms for High Performance Bluetooth Receivers
Research has shown that significant degradation in performance can occur even when operating within the limits for carrier frequency and modulation index offsets permitted by the Bluetooth standard. This is even more severe for multi-bit detectors like the matched filter bank receiver, because such errors accumulate across a longer observation interval. This paper details the derivation of a st...
متن کاملDemodulators for a Zero-IF Bluetooth Receiver
This brief presents low-complexity detectors for a zero-IF Bluetooth receiver based on a simple phase-domain analog-to-digital converter. Measurements and simulations prove that the detectors’ sensitivity lies close to an ideal coherent Gaussian frequency-shift keying (GFSK) detector.
متن کاملBluetooth Low Energy Controller Low IF GFSK Modem
This paper presents the implementation of Bluetooth Low Energy Controller (BTLE), Low Intermediate Frequency (IF), Gaussian Frequency Shift Keying (GFSK) Modulation and Demodulation technique. The GFSK modulation uses a bandwidth bit period product BT=0.5. The modulation index shall be configurable between 0.45 and 0.55. A binary one shall be represented by a positive frequency deviation, and a...
متن کاملPerformance of the Bluetooth System in Fading Dispersive Channels and Interference
Abstract— A noncoherent limiter-discriminator receiver is often considered for the Bluetooth system because of its simplicity and low cost. While its performance is more than adequate for some channels, the results are significantly degraded in either an interference-limited environment or a frequency selective channel. In this paper, we compare the performance of the traditional limiter-discri...
متن کامل