Electrodissolution of Cu-Zn Alloys in Acetate Media
نویسندگان
چکیده
A eletrodissolução de ligas de Cu-Zn, de diferentes composição química (CuZn37 e CuZn39Pb3) foi estudada em solução tampão de acetato, pH 5, através de medidas de potencial de circuito aberto e voltametria cíclica, sob condições estáticas e dinâmicas. A menor resistência à corrosão detectada nestas ligas, comparativamente ao Cu puro, foi atribuída à estrutura da camada anódica formada ZnO.x H 2O /Cu2O-CuO, a qual apresenta menor proteção que a camada Cu2O-CuO, formada sobre o eletrodo de Cu puro. Não foi observada a dissolução seletiva do Zn, verificando-se a dissolução simultânea dos constituintes das ligas. A velocidade de eletrodissolução das ligas neste meio, mostrou-se superior à do Cu puro e inferior à do Zn puro .
منابع مشابه
CORROSION BEHAVIOR OF THE Al-Zn-Mg-Cu ALLOYS WITH NICKEL ADDITIONS
In this research, comparative study of corrosion resistance of aluminum based alloys and Al-alloys with nickel have been investigated. Several processes are conducted for the AlZn-Mg-Cu alloys and Al-Zn-Mg-Cu-0.5%Ni alloys were homogenized, aged then retrogressed and reaged; also, alloys were homogenized then the extruded thereafter heat treated. Al-Zn-Mg-Cu alloy and AlZn-Mg-Cu-Ni alloy sample...
متن کاملStudy of Structural Changes in Cu-Ni-Zn Mixture in Producing of Nickel Silver Alloys by Mechanical Alloying
Production of nickel-silver by mechanical alloying was investigated. Effects of parameters such as milling duration, ball to powder weight ratio, and chemical composition on mechanical alloying process, and alloys color and microstructure were studied. The milled powders were characterized, using XRD and SEM. Results showed that nickel-silvers could be produced by mechanical alloying in a wide ...
متن کاملIn Vitro Degradation Behavior of Ternary Mg-Zn-Se and Mg-Zn-Cu Alloys as Biomaterials.
In this study, the corrosion behavior of Mg-Zn-Se and Mg-Zn-Cu alloys was investigated to evaluate their corrosion behavior related to use as implantable biomaterials. The corrosion behavior of these alloys and a commercially available Mg-Zn alloy were examined using static solution electrochemical testing, dynamic solution gravimetric testing, ion leaching testing, and microscopic evaluation. ...
متن کاملStudy of Structural Changes in Cu-Ni-Zn Mixture in Producing of Nickel Silver Alloys by Mechanical Alloying
Production of nickel-silver by mechanical alloying was investigated. Effects of parameters such as milling duration, ball to powder weight ratio, and chemical composition on mechanical alloying process, and alloy's color and microstructure were studied. The milled powders were characterized, using XRD and SEM. Results showed that nickel-silvers could be produced by mechanical alloying in a wide...
متن کاملElectrodeposition of Zn, Cu, and Zn-Cu Alloys from Deep Eutectic Solvents
Deep eutectic solvents (DESs) comprising choline chloride (ChCl) with either urea or ethylene glycol (EG) have been successfully used as powerful and potential electrolytes for extracting metals from their corresponding metal oxide precursors. In this work, for electrodeposition of Zn and Zn-Cu alloys, ChCl/urea-based DES was employed. Cyclic voltammetry study demonstrates that the reduction of...
متن کامل