Delamination of graphite oxide in a liquid upon cooling.
نویسندگان
چکیده
Graphite oxide (GO) in liquid acetonitrile undergoes a transition from an ordered phase around ambient temperature to a gel-like disordered phase at temperatures below 260 K, as demonstrated by in situ X-ray diffraction. The stacking order of GO layers is restored below the freezing point of acetonitrile (199 K). The reversible swelling transition between a stacked crystalline phase and an amorphous delaminated state observed upon cooling provides an unusual example of increased structural disorder at lower temperatures. The formation of the gel-like phase is attributed to the thermo-responsive conformational change of individual GO flakes induced by stronger solvation. Scanning force microscopy demonstrates that GO flakes deposited onto a solid substrate from acetonitrile dispersions at a temperature below 260 K exhibit corrugations and wrinkling which are not observed for the flakes deposited at ambient temperature. The thermo-responsive transition between the delaminated and stacked phases reported here can be used for sonication-free dispersion of graphene oxide, micro-container applications, or the preparation of new composite materials.
منابع مشابه
Enormous lattice expansion of hummers graphite oxide in alcohols at low temperatures.
A structural study of swelling of Hummers graphite oxide (H-GO) in excess of liquid alcohols was performed as a function of temperature using synchrotron X-ray diffraction and revealed a strong "negative thermal expansion" effect. The increase of the distance between graphene oxide layers is explained by insertion of additional solvent upon cooling of the H-GO/solvent system. The interlayer dis...
متن کاملThe mechanics of coating delamination in thermal gradients
Oxide coatings used for various components in the hot section of aero-turbine engines experience temperature gradients at various stages during their flight cycle. One gradient exists during steady-state, due to the combination of the combustion environment next to the free surface and internal cooling of the underlying superalloy substrate. Other gradients develop during cooling of the surface...
متن کاملMechanisms of Ytterbium Monosilicate/Mullite/Silicon Coating Failure During Thermal Cycling in Water Vapor
An air plasma spray process has been used to apply a model tri-layer Yb2SiO5/Al6Si2O13/Si environmental barrier coating system on SiC test coupons. Significant differences in the thermal expansion of the component layers resulted in periodically spaced mud cracks in the Yb2SiO5 and Al6Si2O13 layers. Upon thermal cycling between 1316°C and 110°C in a 90% H2O/10% O2 environment flowing at 4.4 cm/...
متن کاملIn-situ synthesis and characterization of reduced graphene oxide –Ag nanocomposites
Reduced graphene oxide(rGO)–silver(Ag) nanocomposites have been prepared by using solution based facile one-pot synthesis process. The reaction process involves high-temperature liquid-phase exfoliation of graphite oxide and silver acetate in presence of N-N’dimethylformamide (DMF) solvent, resulting in simultaneous formation of rGO as well as Ag nanoparticles. Different nanocomposites have bee...
متن کاملOxide Film and Porosity Defects in Magnesium Alloy Az91
Porosity is a major concern in the production of light metal parts. This work aims to identify some of the mechanisms of microporosity formation in magnesium alloy AZ91. Microstructure analysis was performed on several samples obtained from gravity-poured ingots in graphite plate molds. Temperature data during cooling was acquired with type K thermocouples at 60 Hz at three locations of each ca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nanoscale
دوره 7 29 شماره
صفحات -
تاریخ انتشار 2015