Magnetic shielding studies of the LHCb rich photon detectors
نویسندگان
چکیده
The LHCb experiment will use two RICH detectors to provide particle identification. The Hybrid Photon Detectors (HPDs) adopted for these detectors are required to operate in the fringe field of the 4Tm LHCb dipole magnet. In fields in excess of 15G, photoelectrons are lost from the active area of an HPD. Shielding the HPDs from the fringe field is therefore essential for the efficient operation of the RICH detectors. This paper describes the technique used to calculate the residual field inside the relevant magnetic shields. The size of the problem, together with the disparity in the geometric scales involved, makes the calculations intractable using a finite element model of the entire magnetic environment. As a result, a sub-modelling method has been used. The model indicates that the photon detectors will operate efficiently. r 2005 Elsevier B.V. All rights reserved.
منابع مشابه
Pixel hybrid photon detectors for the LHCb-RICH system
The baseline option for the photon detectors of the LHCb Ring Imaging Cherenkov (RICH) subsystem is the pixel hybrid photon detector (HPD) [1]. Commercially available pixel HPDs do not fully meet the LHCb RICH requirements, namely wide area coverage over 2.6 m, single photon sensitivity in the wavelength range of 200600 nm, channel size of 2.5 x 2.5 mm and a speed compatible with the LHC bunchc...
متن کاملImaging Hybrid Photon Detectors with Minimized Dead Area and Protection Against Positive Ion Feedback
Imaging Hybrid Photon Detectors (HPD) have been developed for integration in large area Cherenkov detectors for high energy physics and astrophysics. The presented designs – developed particularly for the experiments MAGIC, LHCb and AQUA-RICH – comprise very good imaging properties, protection against positive ion feedback and(or) minimum dead area. The underlying innovations are discussed in s...
متن کاملDevelopment of a Hybrid Photo-Diode and its Front-End Electronics for the BTEV Experiment
The most problematic decision in the design of any RICH Detector is the choice of the photon detector technology. The context of the present photon detector R&D effort is the design of the RICH Detector for the BTEV Experiment [1], in which there is need to efficiently image visible Cherenkov photons from a C4F10 gas radiator over a large area. For BTEV, we require that the RICH photon detector...
متن کاملEffects of particle size and weight percentage of heavy metal elements on photon shielding efficiency of reinforced polymer composites
Background: Polymer composites when reinforced with heavy metals in the form of micro/nano particles are efficient gamma- and X-ray shielding materials providing such advantageous features as cost-effectiveness, light-weight factor, flexibility, non-toxicity, conformability over conventional shields. Materials and Methods: In this paper the influence of weight percentages and particle sizes of ...
متن کاملThe Ring Imaging Cherenkov Detectors for LHCb
The success of the LHCb experiment depends heavily on particle identification over the momentum range 2−100 GeV/c. To meet this challenge, LHCb uses a Ring Imaging Cherenkov (RICH) system composed of two detectors with three radiators. RICH1 has both aerogel and gas (C4F10) radiators, while RICH2 has only a gas (CF4) radiator. The design of RICH1 is almost complete, whereas RICH2 has been const...
متن کامل