Numerical Modeling of Single-Chamber SOFCs with Hydrocarbon Fuels
نویسندگان
چکیده
A two-dimensional numerical model of a single-chamber solid oxide fuel cell SCFC operating on hydrocarbon fuels is developed. The SCFC concept is a simplification of a conventional solid oxide fuel cell in which the anode and cathode are both exposed to the same premixed fuel-air mixture, and selective catalysts promote electrochemical oxidation of the fuel at the anode and simultaneous electrochemical oxygen reduction at the cathode. Optimization of SCFC stacks requires considering complex, coupled chemical and transport processes. The model accounts for the coupled effects of gas channel fluid flow, heat transfer, porous media transport, catalytic reforming-shifting chemistry, electrochemistry, and mixed ionic-electronic conductivity. It solves for the velocity, temperature, and species distributions in the gas, profiles of gaseous species and coverages of surface species within the porous electrodes, and the current density profile in an SCFC stack for a specified electrical bias. The model is general, and can be used to simulate any electrode processes for which kinetics are known or may be estimated. A detailed elementary mechanism is used to describe the reactions over the anode catalyst surface. Different design alternatives including yttria-stabilized zirconia vs Ce0.8Sm0.2O1.9 electrolytes, the effects of mixed conductivity, and the optimal fuel-to-air ratio are explored. © 2006 The Electrochemical Society. DOI: 10.1149/1.2404895 All rights reserved.
منابع مشابه
Novel SOFC anodes for the direct electrochemical oxidation of hydrocarbons
Recent developments in solid-oxide fuel cells (SOFC) that electrochemically oxidize hydrocarbon fuels to produce electrical power without first reforming them to H2 are described. First, the operating principles of SOFCs are reviewed, along with a description of state-of-the-art SOFC designs. This is followed by a discussion of the concepts and procedures used in the synthesis of direct-oxidati...
متن کاملComputational evaluation of strut based scramjet engine combustion with different conventional fuel/oxidizer
The high performance and instability in combustion chamber are the most challenging requirements for faster developments and technical advances in most of the engines. The design and development challenges of such engines are highly influenced by its combustion behavior taking place inside the combustion chamber. Studies on the injection, vaporization and combustion phenomena inside combustion ...
متن کاملNumerical Study of Heterogeneous Reactions in an SOFC Anode with Oxygen Addition
Previous experimental studies have shown that addition of small amounts of oxygen to a hydrocarbon fuel stream can control coking in the anode, while relatively large amounts of oxygen are present in the fuel stream in single-chamber solid oxide fuel cells SOFCs . In order to rationally design an anode for such use, it is important to understand the coupled catalytic oxidation/ reforming chemis...
متن کاملImproving Carbon Tolerance of Ni Catalysts and Electrocatalysts
Introduction Steam reforming is a process that converts hydrocarbon fuels into hydrogen and oxygenated carbon species. This process is important for catalytic hydrogen production and for direct electrochemical reforming of hydrocarbons over high temperature fuel cells, such as Solid Oxide Fuel Cells (SOFCs). One of the main problems associated with the process is that conventional reforming (el...
متن کاملFactors governing oxygen reduction in solid oxide fuel cell cathodes.
Recent worldwide interest in building a decentralized, hydrogen-based energy economy has refocused attention on the solid oxide fuel cell (SOFC) as a potential source of efficient, environmentally friendly, fuel-versatile electric power. Due to its high operating temperature, the SOFC offers several potential advantages over polymer-based fuel cells, including reversible electrode reactions, lo...
متن کامل