Influence of process and geometry parameters on the surface layer state after roller burnishing of IN718
نویسندگان
چکیده
Highly stressed components of modern aircraft engines, like fan and compressor blades, have to satisfy stringent requirements regarding durability and reliability. The induction of compressive residual stresses and strain hardening in the surface layer of these components has proven as a very promising method to significantly increase their fatigue resistance. The required surface layer properties can be achieved by the roller burnishing process, which is characterised by high and deeply reaching compressive residual stresses, high strain hardening and excellent surface quality. In order to achieve a defined state of the surface layer, the determination of optimal process parameters for a given task still requires an elaborate experimental set-up and subsequent time-consuming and cost-extensive measurements. The development of well funded process knowledge about the correlation of the process parameters, the processed geometry and the surface layer state is the subject of this article.
منابع مشابه
Analysis of Surface Roughness and Micro-hardness in Roller Burnishing of Aluminum Alloy 6061
Burnishing is a chip-less finishing process, in which a hard roller or ball presses the surface layer of part to perform plastic deformation in the surface layer and produce improved finish, enhanced hardness and compressive residual stresses on the surface of special materials such as Aluminum and Brass. In the following research, the effect of input parameters such as feed rate, cutting speed...
متن کاملExperimental study of Roller burnishing process on plain carrier of planetary type gear box
Burnishing is cold working process where hard roller are being pressed against irregular surface, so that surface finish and the micro hardness increases. In this study internal roller burnishing tool is used to burnish the drilled hole. Speed, feed, and number of passes have been varied using taguchi method to examine the surface finish and microhardness. Anova analysis is carried out. Surface...
متن کاملInvestigation of Effective Parameters of the Two-Layer Sheet Hydroforming Process for Hollow Parts with Complex Geometry
AbstractHydroforming process is a deep stretching process only with the difference that a fluid is used instead of the mandrel. This paper investigates the hydroforming process of non-cylindrical and non-spherical geometries using finite element analysis software to calculate the influences of effective process parameters such as the coefficient of friction between the surfaces and the pressure...
متن کاملInfluence of EDM Characteristic Parameters on the Surface Microstructure in CK45 Alloy Steel
Electro Discharge Machining (EDM) is a very efficient machining process widely used in manufacturing components of complicated geometry. Based on its nature, i.e. material removal by electric discharge, the process induces thermal stresses that in turn result in generation of wide spread micro-cracks on the surface of the machined part. In this paper the influence of EDM characteristic paramete...
متن کاملEffective Parameters in Contact Mechanic for Micro/nano Particle Manipulation Based on Atomic Force Microscopy
The effect of geometry and material of the Micro/Nano particle on contact mechanic for manipulation was studied in this work based on atomic force microscopy. Hertz contact model simulation for EpH biological micro particle with spherical, cylindrical, and circular crowned roller shape was used to investigate the effect of geometry on contact simulation process in manipulation. Then, to val...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Production Engineering
دوره 3 شماره
صفحات -
تاریخ انتشار 2009