Combined Input Shaping and Feedback Control of a Double - Pendulum System Subject to External Disturbances
نویسنده
چکیده
A control system combining input shaping and feedback is applied to a double-pendulum bridge crane subjected to external disturbances. The external disturbances represent naturally occurring forces, such as gusting winds. The proposed control method achieves fast point-to-point response similar to open-loop input-shaping control. It also minimizes transient deflections and disturbance-induced residual swing using the feedback control. Effects of parameters such as the mass ratio of the double-pendulum, suspension length ratio, and the traveled distance were studied via numerical simulation and hardware experiments. The controller effectively suppresses the disturbances and is robust to modeling uncertainties and task variations.
منابع مشابه
Dynamics and Regulation of Locomotion of a Human Swing Leg as a Double-Pendulum Considering Self-Impact Joint Constraint
Background:Despite some successful dynamic simulation of self-impact double pendulum (SIDP)-as humanoid robots legs or arms- studies, there is limited information available about the control of one leg locomotion.Objective :The main goal of this research is to improve the reliability of the mammalians leg locomotion and building more elaborated models close to the natural movements, by modelin...
متن کاملDouble-pendulum Crane Operator Performance Comparing Pd-feedback Control and Input Shaping
A primary limitation on crane operations is the difficulty of controlling payload oscillations. Given the significance of cranes, it is not surprising that a large amount of research has been dedicated to eliminating crane payload oscillation. Numerous feedbackbased control methods have been proposed. Command-shaping is another method that has received significant attention. This paper compares...
متن کاملAttenuation of Initial Oscillation in Bridge Cranes via Input-shaping-based Feedback Control Methods
Crane payloads are frequently subject to oscillations induced through movement and external disturbances. These oscillations degrade performance and can be dangerous. Input shaping is an effective method to move cranes without creating oscillation, however it is not effective on initial swing. This paper develops a feedback control system, with two operation modes based on input shaping, that a...
متن کاملControl of Flexible Link Robot using a Closed Loop Input-Shaping Approach
This paper is has addressed the Single Flexible Link Robot. The dynamical model is derived using Euler-Lagrange equation and then a proper controller is designed to suppress a vibration based-on Input-Shaping (IS) method. But, IS control method is an open loop strategy. Due to the weakness of open loop control systems, a closed loop IS control system is proposed. The achieved closed loop c...
متن کاملHybrid Control to Approach Chaos Synchronization of Uncertain DUFFING Oscillator Systems with External Disturbance
This paper proposes a hybrid control scheme for the synchronization of two chaotic Duffing oscillator system, subject to uncertainties and external disturbances. The novelty of this scheme is that the Linear Quadratic Regulation (LQR) control, Sliding Mode (SM) control and Gaussian Radial basis Function Neural Network (GRBFNN) control are combined to chaos synchronization with respect to extern...
متن کامل