PSD Analysis and Optimization of 2500hp Shale Gas Fracturing Truck Chassis Frame
نویسندگان
چکیده
The three-dimensional model of 2500hp shale gas fracturing truck chassis frame was established and the natural frequency of the frame was obtained by modal analysis. Taking the displacement power spectrum density of a typical road as a random excitation, the random vibration response of frame was obtained by PSD module of finite element analysis software ANSYS. Based on the results of PSD analysis, the frame’s fatigue characteristic under random vibration condition was studied according to Gauss distribution theory and Miner fatigue cumulative damage law, and the random fatigue strength of the frame was also calculated and optimized as well. A reliable and practical method was provided to verify the fatigue strength and to predict fatigue life of fracturing truck chassis frame. The conclusion provides an important theoretical reference for optimization of the frame.
منابع مشابه
Municipalities and Hydraulic Fracturing: Trends in State Preemption
Hydraulic fracturing is a technology used to extract natural gas from shale rock formations found deep beneath the earth. It raises many public health and environmental issues of concern to municipalities and planners, both urban and rural. These issues range from potential water contamination and air pollution to noise, dust, truck traffic, and even minor earthquakes. This article identifies r...
متن کاملNumerical Evaluation and Optimization of Multiple Hydraulically Fractured Parameters Using a Flow-Stress-Damage Coupled Approach
Multiple-factor analysis and optimization play a critical role in the the ability to maximizethe stimulated reservoir volume (SRV) and the success of economic shale gas production. In this paper, taking the typical continental naturally fractured silty laminae shale in China as anexample, response surface methodology (RSM) was employed to optimize multiple hydraulic fracturing parameters to max...
متن کاملInvestigation of the Main Factors During Shale-gas Production Using Grey Relational Analysis
Shale gas is one of the primary types of unconventional reservoirs to be exploited in search for long-lasting resources. Production from shale gas reservoirs requires horizontal drilling with hydraulic fracturing to achieve the most economic production. However, plenty of parameters (e.g., fracture conductivity, fracture spacing, half-length, matrix permeability, and porosity, etc) have high un...
متن کاملShale Gas Supply Chain Design and Operations toward Better Economic and Life Cycle Environmental Performance: MINLP Model and Global Optimization Algorithm
In this work, the life cycle economic and environmental optimization of shale gas supply chain network design and operations is addressed. The proposed model covers the well-to-wire life cycle of electricity generated from shale gas, consisting of a number of stages including freshwater acquisition, shale well drilling, hydraulic fracturing and completion, shale gas production, wastewater manag...
متن کاملThe Key and the Countermeasures Research of Shale Gas Fracturing Technology
Shale gas resources are abundantly distributed with low porosity and permeability. Horizontal well and fracturing are prior considerations. Fracturing is a widely-used technology to enhance gas production. In this paper, the author (a) investigated the present stimulation of Barnett and Haynesvile gas fields (Fig. 1) in America, Sichuan basin (Fig. 2) in China and Cooper basin (Fig. 3) in Austr...
متن کامل