Analysis of the Distribution of Spindle

ثبت نشده
چکیده

The spindle of the colonial diatom Fragilaria contains two distinct sets of spindle microtubules (MTs): (a) MTs comprising the central spindle, which is composed of two half-spindles interdigitated to form a region of "overlap;" (b) MTs which radiate laterally from the poles. The central spindles from 28 cells are reconstructed by tracking each MT of the central spindle through consecutive serial sections. Because the colonies of Fragilaria are fiat ribbons of contiguous cells (clones), it is possible, by using single ribbons of cells, to compare reconstructed spindles at different mitotic stages with minimal intercellular variability. From these reconstructions we have determined: (a) the changes in distribution of MTs along the spindle during mitosis; (b) the change in the total number of MTs during mitosis; (c) the length of each MT (measured by the number of sections each traverses) at different mitotic stages; (d) the frequency of different classes of MTs (i.e., free, continuous, etc.); (e) the spatial arrangement of MTs from opposite poles in the overlap; 09 the approximate number of MTs, separate from the central spindle, which radiate from each spindle pole. From longitudinal sections of the central spindle, the lengths of the whole spindle, half-spindle, and overlap were measured from 80 cells at different mitotic stages. Numerous sources of error may create inaccuracies in these measurements; these problems are discussed. The central spindle at prophase consists predominantly of continuotls MTs (pole to pole). Between late prophase and prometaphase, spindle length increases, and the spindle is transformed into two half-spindles (mainly polar MTs) interdigitated to form the overlap. At late anaphase-telophase, the overlap decreases concurrent with spindle elongation. Our interpretation is that the MTs of the central spindle slide past one another at both late prophase and late anaphase. These changes in MT distribution have the effect of elongating the spindle and are not involved in the poleward movement of the chromosomes. Some aspects of tracking spindle MTs, the interaction of MTs in the overlap, formation of the prophase spindle, and our interpretation of rearrangements of MTs, are discussed. J. CELL BIOLOGY 9 The Rockefeller University Press 9 0021-9525/78/1201-073751.00 Volume 79 December 1978 737-763 737 on O cber 0, 2017 jcb.rress.org D ow nladed fom

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

آنالیزتنشهای مکانیکی و حرارتی در اسپیندل ماشینهای تراش

Dimensional accuracy in machined parts depends on the precision of spindle, which is highly affected by applied forces, itself. This precision of spindle becomes more serious when it is used for a period of long times. Therefore, stress and strain analysis of spindle is very important in the behavior and preservation of its precision. In this paper, the forces applied to the spindle of a turnin...

متن کامل

Effect of dehydroepiandrosterone on meiotic spindle structure and oocyte quality in mice

Objective(s): Dehydroepiandrosterone (DHEA) has been reported to improve pregnancy chances in women with diminished ovarian reserve (DOR) and to reduce miscarriage rates by 50–80%. This study, therefore, assesses effects of DHEA on number of retrieved oocytes and meiotic spindles.Materials and Methods: A randomized, prospective, controlled study was conducted on eight groups, four groups of you...

متن کامل

The Influence of Meiotic Spindle Configuration by Cysteamine during in vitro Maturation of Mouse Oocytes

Background: The aim of this study was to assess effects of cysteamine as an anti-oxidant on rate of in vitro maturation of oocyte and determination of its effects on spindle size and shape. Methods: Pre-mature mice were primed with pregnant mare stimulating gonadotrophin (PMSG) and germinal vesicle (GV) stage oocytes were obtained 48 h after. The oocytes were cultured in tissue culture medium (...

متن کامل

O-11: Zona Pellucida Birefringence and Meiotic Spindle Visualization of Human Oocytes Are Not Influenced by In Vitro Maturation Technology

Background: In vitro maturation (IVM) is a promising treatment option for certain infertile women. Nowadays, with the aid of the Polscope, it has become possible to evaluate zona pellucida (ZP) and spindle as parameters of oocyte quality. The goal was to investigate the relationship between the presence of the meiotic spindle and ZP birefringence with morphology of the in vivo and in vitro matu...

متن کامل

Numerical and Experimental Investigation of Thickness Variation in the Spinning Process of Al-1060 Alloy

Metal spinning as a kind of manufacturing process has capability to shape hollow components. In present work shear spinning process is used to formplates into conical shapes. Moreover, the aim of this research is to demonstrate the impact of the process parameters (i.e. feeding rate and spindle speed) on wall thickness. This approachwas done by experimental and finite elements method. The resul...

متن کامل

Optimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System

Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003