Single-edge crack growth in graphene sheets under tension
نویسنده
چکیده
Department of Mechanics of Materials, School of Mechanical Engineering, Hanoi University of Science and Technology, No. 1, Dai Co Viet Road, Hanoi, Viet Nam b International Research Center for Computational Materials Science, Hanoi University of Science and Technology, No. 1, Dai Co Viet Road, Hanoi, Viet Nam Department of Engineering Science and Mechanics, M/C 0219, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, USA
منابع مشابه
The formation of wrinkles in single-layer graphene sheets under nanoindentation.
We investigate the formation of wrinkles and bulging in single-layer graphene sheets using an equivalent atomistic continuum nonlinear hyperelastic theory for nanoindentation and nanopressurization. We show that nonlinear geometrical effects play a key role in the development of wrinkles. Without abandoning the classical tension field membrane theory, we develop an enhanced model based upon the...
متن کاملFactors controlling the size of graphene oxide sheets produced via the graphite oxide route.
We have studied the effect of the oxidation path and the mechanical energy input on the size of graphene oxide sheets derived from graphite oxide. The cross-planar oxidation of graphite from the (0002) plane results in periodic cracking of the uppermost graphene oxide layer, limiting its lateral dimension to less than 30 μm. We use an energy balance between the elastic strain energy associated ...
متن کاملTearing of free-standing graphene.
We examine the fracture mechanics of tearing graphene. We present a molecular dynamics simulation of the propagation of cracks in clamped, free-standing graphene as a function of the out-of-plane force. The geometry is motivated by experimental configurations that expose graphene sheets to out-of-plane forces, such as back-gate voltage. We establish the geometry and basic energetics of failure ...
متن کاملCrack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions
The initial stage of fretting fatigue crack growth is significantly influenced by tangential force induced by fretting action along the contact surface where a mixed-mode crack growth is involved. Fretting crack behavior of aluminum alloy 2024 was studied, taking into account the problem of contact asperities. Finite element was used for the determination of the stress field near the contact su...
متن کاملCrack propagation in pre-strained single layer graphene sheets
Article history: Received 13 August 2013 Received in revised form 25 November 2013 Accepted 2 December 2013
متن کامل