Numerical Value Research on Bake-out Technology with Dilution Ventilation for Building Materials
نویسندگان
چکیده
Bake-out with dilution ventilation is a potential technology that can shorten emission cycle of indoor VOCs and other hazardous gas, and then reduce indoor environment pollution brought forward by building materials. This technology based on characteristic that chemical substance of building materials is easier to emit under high temperature. This paper used numerical value method to compute TVOC removal amount under different operation conditions and concentration changes indoor during bake-out exhaust dilution process. Except that, this paper also discussed effects of bake-out temperature, bake-out time, ventilation time, air change rate on removal.
منابع مشابه
Comparison of Ventilation Strategies during Bake-out in Winter at Newly Built Apartment Buildings
To reduce the concentration of volatile organic compounds (VOCs) and formaldehyde emitted from building materials and furnishings, it has been suggested that new buildings undergo a bake-out. According to the existing studies [3, 4], ventilation during a bake-out is believed to be essential for reducing the concentration of indoor air pollutants. For a practical use of bake-out, several ventila...
متن کاملOptimum Installation of Sorptive Building Materials Using Contribution Ratio of Pollution Source for Improvement of Indoor Air Quality.
Reinforcing the insulation and airtightness of buildings and the use of building materials containing new chemical substances have caused indoor air quality problems. Use of sorptive building materials along with removal of pollutants, constant ventilation, bake-out, etc. are gaining attention in Korea and Japan as methods for improving such indoor air quality problems. On the other hand, sorpt...
متن کاملPerformance Evaluation of Infrared Bake-Out for Reducing VOCs and Formaldehyde Emission in MDF Panels
Building materials can release a wide range of pollutants, particularly the volatile organic compounds (VOCs) and formaldehyde, which can cause indoor air related health problems. Bake-out technology is a cost-efficient method to reduce emissions of toxic substance from building materials in residential housing units. The temperature rise and the bake-out performance of MDF panels were evaluate...
متن کاملNatural Ventilation: Analysis of Indoor Airflow in an Assumed Cubic Building with Opposite Openings by CFD Investigations
The natural ventilation is an easy way to exchange the indoor polluted warm air with outdoor fresh air. The wind power injects outdoor fresh air into the building. A good indoor air current and subsequently a proper exhaust depend on the openings’ conditions and their situations. A serious architectural question is under what conditions of the openings the wind-cross ventilation can be effectiv...
متن کاملComparative Study on the Influence of Window To Wall Ratio on Energy Consumption and Ventilation Performance in Office Building of Temperate Humid Climate: a Case Study in Rash
The natural ventilation and the energy consumption are very important characteristics in buildings. Representation of the patterns for better natural ventilation performance versus lower increase in energy consumption is significant and useful. This study is simulating an office building in the temperate and humid climate of Rasht in Iran, and calculated the annual ventilation and the energy co...
متن کامل