Durability of the Bonding Performance of Frp-concrete Interface Externally Bonded with Frp Composite Sheet
نویسندگان
چکیده
The strengthening of concrete structures externally bonded with fiber reinforced polymer (FRP) sheet is increasingly being used for repair and rehabilitation of existing structures. This paper provides information in the area of long-term durability of FRP-concrete interface externally bonded with FRP composite sheet. It mainly discusses and summarizes the influence of harsh environmental exposure condition such as high temperature and humidity, light ageing, corrosion environment, sea water, wet/dry cycles, freeze/thaw cycles, temperature et al. Last the future work about the durability of the bonding performance of FRP-concrete interface is put forward.
منابع مشابه
Durability Considerations for FRP-Strengthened RC Structures in the Australian Environment
1.0 Introduction It is now reasonably well established that reinforced concrete (RC) structural elements can be strengthened/retrofitted/repaired by bonding high-strength fibre reinforced polymer (FRP) composites. Such reasons include steel reinforcement corrosion, construction flaws, change in loading or structure usage, or damage from impact or seismic events. Traditional methods of repair ca...
متن کاملInfluence of Fiber Surface Treatment on the Flexural Behavior of Frp Strengthened Mortar
There is a growing need for the rehabilitation, repair, and upgrading of concrete structures such as bridges and buildings. The repair or rehabilitation of reinforced concrete structures often offers a lower cost alternative to rebuilding, and it is traditionally achieved by bonding steel plates to the tensile face of a reinforced concrete member. The shear strength can be enhanced with plates ...
متن کاملFRP Repair of Corrosion-Damaged Reinforced Concrete Beams
Corrosion of steel reinforcement is one of the main durability problems facing reinforced concrete infrastructures worldwide. This paper will summarize the results of a multi-phase experimental program undertaken at the University of Waterloo to investigate the viability of using externally bonded fiber reinforced polymer (FRP) laminates to rehabilitate corrosion-damaged reinforced concrete bea...
متن کاملNumerical Simulation of Debonding Failure of Reinforced Concrete Beams Strengthened with Externally Bonded Frp
As the life age of the existing structures are required to meet the changing demands on civil infrastructures. So strengthening and retrofitting are required. Recently many techniques to strengthen the reinforced concrete beams in flexural by using fiber reinforced polymer (FRP) had appeared. The most famous technique among them is strengthening the (RC) beams with externally bonded FRP sheet t...
متن کاملPre-Cracked Concrete Shear Strengthened with External CFRP Strips
In reinforced concrete design, there are situations where transfer of shear across a specific plane needs to be considered. Examples of such situation include corbels, bearing shoes, ledger beam bearing, and a host of connection between precast concrete elements. In this study, the shear transfer behavior of reinforced concrete is investigated experimentally by conducting test on 6 precracked p...
متن کامل