Determination of Geometric Dimensions of a Double Sided Linear Switched Reluctance Motor
نویسنده
چکیده
In this study, a double-sided linear switched reluctance motor (LSRM) drive was investigated as an alternative actuator for vertical linear transportation applications such as a linear elevator door, hospital and subway doors which move linearly and where accurate position control and rapid response is requested. A prototype sliding elevator door that is focused on a home elevator with LSRMs is designed. The motor has 6/4 poles, 3 phases, 8A, 24V, 250 W and 250 N pull forces. Air gap between rotor and translator poles of the designed motor and phase coil’s ideal inductance profile are obtained in compliance with the geometric dimensions. Operation and switching sections as motor and generator has been determined from the inductance profile. Keywords—Linear switched reluctance motor, sliding door, elevator door, linear motor design.
منابع مشابه
The finite element analysis of the linear hybrid reluctance motor for the electromagnetic launch system
The Electromagnetic Aircraft Launch System (EMALS) is being developed utilizing electrical and electronic technologies. EMALS is emerging in order to replace the existing steam catapult on naval carriers. Recently, the double-sided linear launcher has drawn increasing attention of researchers. This paper presents the design and analysis of the Linear Hybrid Reluctance Motor (LHRM). This new mot...
متن کاملOptimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force
In the permanent magnet linear synchronous motor (PMLSM), force ripple is harmful, useless and disturbing. The force ripple is basically composed of two components: detent force and mutual force ripple. This force is influenced by the geometric parameters of the permanent magnet (PM) motors; such as width, thickness and length of the magnet poles, length and thickness of the rotor and stato...
متن کاملOptimum design of a double-sided permanent magnet linear synchronous motor to minimize the detent force
In the permanent magnet linear synchronous motor (PMLSM), force ripple is harmful, useless and disturbing. The force ripple is basically composed of two components: detent force and mutual force ripple. This force is influenced by the geometric parameters of the permanent magnet (PM) motors; such as width, thickness and length of the magnet poles, length and thickness of the rotor and stato...
متن کاملElectromagnetic field analysis of novel low cogging force, linear switched reluctance motor, based on 2-D finite element method
This paper deals with electromagnetic design and 2-D (two-dimensional) magnetic field analysis of novel low force ripple linear switched reluctance (LSR) motor. The configuration that has been presented here has a higher number of rotor poles than stator poles, and the purpose of this configuration is to improve the force ripple, which is the weak point of LSRMs. In order to illustrate the ...
متن کاملAutomatic Phase Advancing in Switched Reluctance Motor by Employing an Electronic Governor for a Desired Speed Angle Profile
Switched reluctance motor (SRM) drive has remarkable characteristics that make it attractive for high-speed applications. As the motor's speed increases the shape of the current waveform changes in such way that limits the production of motoring torque. At high speeds, it is possible for the phase current never reaches the desired value due to the self e.m.f. of the motor, therefore, the torque...
متن کامل