A Review of Refrigerant Maldistribution
نویسندگان
چکیده
In recent years, conservation of energy has become a challenging issue in air-conditioning applications. In order to overcome this issue, many researchers have recommended the use of a Parallel Flow Condenser and a low Global Warming Potential and Ozone Depletion Potential refrigerant, such as R32, in air conditioning systems. However, PFC faces the critical challenge of flow maldistribution in the tubes. This literature review mainly examines the refrigerant maldistribution problem which has been investigated by previous researchers. It was found that many of the researchers did not properly analyse the influence of flow maldistribution profiles on the performance degradation of heat exchangers. In order to have a comprehensive analysis of tube-side maldistribution in Parallel Flow microchannel heat exchangers, it is recommended that the influence of the higher statistical moments of the probability density function of the flow maldistribution profiles on performance degradation be quantified. Additionally, R32 maldistribution should be analysed and compared with R410A, which is the current commonly used refrigerant in air conditioning units. Moreover, in order to have a realistic simulation of the effect of refrigerant flow maldistribution profiles on performance degradation of heat exchangers, the effect of superheat and sub-cooling must be analysed.
منابع مشابه
Interleaved Circuitry And Hybrid Control As Means To Reduce The Effects Of Flow Maldistribution
Flow maldistribution in evaporators can lead to significant degradation of capacity and efficiency of vapor compression equipment. A significant amount of work has previously been done to mend these issues. For variable air flow maldistribution, refrigerant compensation was proposed to reduce the performance degradation. For fixed air side maldistribution, refrigerant circuitry modifications we...
متن کاملA Review of State of the Art in Modeling of Air-to-Refrigerant Heat Exchangers for HVAC&R Applications
Air-to-refrigerant heat exchangers are a key component in all air-conditioning, heat pump and refrigeration systems. The most common of types of air-to-refrigerant heat exchangers are tube-fin and microchannel heat exchangers. There has always been a great emphasis on understating the underlying physics and improving the performance of these heat exchangers. More recently, researchers have been...
متن کاملEffects of Non-Uniform Refrigerant and Air Flow Distributions on Finned- Tube Evaporator Performance
An experimental investigation was implemented to determine the capacity degradation due to non-uniform refrigerant and air flow distributions, and to assess the potential to recover the lost capacity via controlling refrigerant distribution between individual refrigerant circuits. The tests were performed on a three-circuit, threedepth-row, finned-tube evaporator. Refrigerant inlet quality, exi...
متن کاملApplication of a Hybrid Control of Expansion Valves to a 5-ton Domestic Heat Pump
The proposed hybrid control employs a primary expansion valve that provides most of the pressure drop, while small secondary balancing valves in the distributor lines to the evaporator circuits adjust the refrigerant flow to provide equal circuit exit superheats. This paper presents experimental results for application of hybrid control of expansion valves to a 5-ton R410A domestic heat pump. B...
متن کاملA Generalized Effectiveness-NTU Based Variable Geometry Microchannel Heat Exchanger Model
Microchannel heat exchangers (MCHXs) are now widely used in the HVAC&R industry. Similar to tube-fin heat exchangers used mainly in the indoor units, the innovative variable geometry microchannel heat exchanger will further reduce its compact size and enhance its performance. Variable geometry refers to a heat exchanger with different tube and fin surfaces within the same core with one or more ...
متن کامل