Effect of Loading Rate on Mechanical Properties of Micro-sized Oak Wood
نویسنده
چکیده
The aim of this study was to investigate the effect of loading rate on the micro-mechanical properties of oak (Quercus petraea) wood. Bending strength, modulus of elasticity in bending, compression strength parallel to the grain and tensile strength parallel to the grain were determined using microsized test samples. Three different loading rates were used for each test. The first loading rates were determined according to related ISO standards and the second and third loading rates were determined for half and a quarter of the standard loading rates. Results showed that the loading rate significantly affected the modulus of elasticity, tensile strength and compression strength of the oak wood, while the bending strength was not affected.
منابع مشابه
Evaluation and Comparison of Performance of some Mechanical Control Methods for Yellow Mistletoe (Loranthus europaeus Jacq.) at Different Altitudes (Case study: Oak forests of Hyanan, Ilam)
Yellow mistletoe is a semi-parasite plant lives in the Zagros forests on Persian oak trees. Mechanical control is one of the basic acts to manage yellow mistletoe contamination. This research aimed to evaluate the performance of mechanical methods; wood-glue, clay, black plastic, natural color and control treatment to control yellow mistletoe at different altitudes and selecting the most sui...
متن کاملDynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites
In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...
متن کاملEffects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding
This study investigates the effects of micro- and nano-sized SiC powder on the rheological behavior of Al based feedstocks for powder injection molding (PIM). Different compositions of Al feedstocks with additions of micro and nano-SiC powder were prepared and their rheological properties were measured with a rotational rheometer. The effects of SiC content and shear rate were investigated and...
متن کاملEFFECT OF T6 HEAT TREATMENT ON MECHANICAL PROPERTIES OF CERAMIC REINFORCED CASTED ALUMINUM ALLOY
Aluminium base alloy (Al-Cu-Si) was reinforced with silicon carbide (SiC) particles, in various percentage compositions from 0-20 wt%. Silicon carbide particle size of 20µm was selected. The molten slurry of SiC reinforced base aluminium metal was casted through green and dry sand casting methods and solidification process was carried out under ambient conditions. A selected population...
متن کاملA novel method for manufacturing of wood flour/PP composites with better fire retardancy and mechanical properties
This study was conducted to investigate the effects of applying methods andamount of ammonium polyphosphate (0, 2 and 4 wt%) on fire retardancy andmechanical properties of wood flour/polypropylene composites. The resultsshowed that addition of fire retardant improved the mechanical properties such astensile and flexural strengths and fire retardancy of composites. But by increasingof fire retar...
متن کامل