Passive coherent beam combining of four Yb-doped fiber amplifier chains with injection-locked seed source.

Compact Tunable 10 W picosecond Sourcebased on Yb-doped Fiber Amplification of Gain Switch Laser Diode

A compact tunable 10 W picosecond source based on Yb-doped fiber amplification of gain switch laser diode has been demonstrated. A gain switch semiconductor laser diode was used as the seed source, and a multi-stage single mode Yb-doped fiber preamplifier was combined with two large mode area double-clad Yb-doped fiber main amplifiers to construct the amplification system. The tunable pulses wi...

Spectral shaping of a 10 W diode laser-Yb-fiber amplifier system

We describe a continuous-wave master-oscillator power-amplifier system based on a distributed Bragg reflection diode laser and an Yb doped fiber amplifier. The observed optical spectrum of the amplified seed source can be tailored to arbitrary shapes and widths between 30 MHz and greater than 1 GHz by controlling the radio frequency modulation wave form of the injection current. © 2006 American...

Resonantly Induced Refractive Index Changes in Yb-doped Fibers: the Origin, Properties and Application for all-fiber Coherent Beam Combining

Fiber four-wave mixing source for coherent anti-Stokes Raman scattering microscopy.

We present a fiber-format picosecond light source for coherent anti-Stokes Raman scattering microscopy. Pulses from a Yb-doped fiber amplifier are frequency converted by four-wave mixing (FWM) in normal-dispersion photonic crystal fiber to produce a synchronized two-color picosecond pulse train. We show that seeding the FWM process overcomes the deleterious effects of group-velocity mismatch an...

Doping management for high-power fiber lasers: 100 W, few-picosecond pulse generation from an all-fiber-integrated amplifier.

Thermal effects, which limit the average power, can be minimized by using low-doped, longer gain fibers, whereas the presence of nonlinear effects requires use of high-doped, shorter fibers to maximize the peak power. We propose the use of varying doping levels along the gain fiber to circumvent these opposing requirements. By analogy to dispersion management and nonlinearity management, we ref...