Development of a servo-controller of heart rate using a treadmill.

نویسندگان

  • T Kawada
  • G Sunagawa
  • H Takaki
  • T Shishido
  • H Miyano
  • H Miyashita
  • T Sato
  • M Sugimachi
  • K Sunagawa
چکیده

Although treadmill exercise involves a more familiar range of motions and is thus more physiological in terms of daily activity than cycle ergometer exercise, difficulties in controlling the exercise intensity have limited its utility. As heart rate (HR) has been used as a measure of exercise intensity, controlling HR should allow for the proper control of exercise intensity during treadmill exercise. Thus, a servo-controller framework was applied to regulate HR during treadmill exercise. After estimating an averaged transfer function from speed command to HR, feedback parameters were optimized via a computer simulation in order to achieve a quick and stable HR response. The performance of the servo-controller of HR was then examined in 10 healthy subjects. Standard deviations of the steady-state difference between the target and measured HRs were 2.7+/-0.9 and 5.0+/-1.4 beats/min in the stepwise and ramp target HR protocols, respectively. The rise time to reach 90% of the target HR was 93+/-20 s in the stepwise protocol. It was concluded that a treadmill implemented with a negative feedback mechanism made it possible to precisely regulate HR and thus exercise intensity.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling, Control and Simulation of Cascade Control Servo System for one Axis Gimbal Mechanism

The gimbal stabilization mechanism is used to provide the stability to an object mounted on the gimbal by isolating it from the base angular motion and vibration. The purpose of this paper is to present a model of control servo system for one axis gimbal mechanism using a cascade PID controller. The gimbal torque relationships are derived by taking into consideration the base angular motion. Th...

متن کامل

Velocity Control of Electro Hydraulic Servo System by using a Feedback Error Learning Method

In this paper, a new control method based on FEL electro hydraulic servo control withnonlinear flux and internal friction, has been presented. The new approach based oncontrollers combined by a classic PD controller and a fuzzy controller is smart. This newtechnique has a good ability to control the performance and stability. Simulations have beencarried out in Matlab environment and the result...

متن کامل

Fuzzy PD Cascade Controller Design for Ball and Beam System Based on an Improved ARO Technique

The ball and beam system is one of the most popular laboratory setups for control education. In this paper, we design a fuzzy PD cascade controller for a ball and beam system using Asexual Reproduction Optimization (ARO) technique. The ball & beam system consists of a servo motor, a grooved beam, and a rolling ball. This system utilizes a servo motor to control ball’s position on the beam. Chan...

متن کامل

Adaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory

In this paper, based on feedback linearization control method and using a special PI (propotational integrator) regulator (IP) in combination with a feed-forward controller, a three-phase induction servo-drive is speed controlled. First, an observer is employed to estimate the rotor d and q axis flux components. Then, two input-output state variables are introduced to control the dynamics of to...

متن کامل

Adaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory

In this paper, based on feedback linearization control method and using a special PI (propotational integrator) regulator (IP) in combination with a feed-forward controller, a three-phase induction servo-drive is speed controlled. First, an observer is employed to estimate the rotor d and q axis flux components. Then, two input-output state variables are introduced to control the dynamics of to...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Japanese circulation journal

دوره 63 12  شماره 

صفحات  -

تاریخ انتشار 1999