VersaPatch: A Low Cost 2.5D Capacitive Touch Sensor
نویسندگان
چکیده
Capacitive input devices are becoming increasingly prevalent in consumer devices. This paper presents the hardware and algorithms for the low cost implementation of a capacitive 2.5D input device. The low cost and low power consumption of the device make it suitable for use in portable devices such as cellular phones. The electrical properties used are such that the preexisting snap dome technologies in such devices can be used as capacitive sensing elements, further reducing the cost and size impact of the capacitive sensor.
منابع مشابه
A New Capacitive Sensing Circuit using Modified Charge Transfer Scheme
— This paper proposes a new circuit for capacitive sensing based on Dickson's charge pump. The proposed touch sensing circuit includes three stages of NMOS diodes and capacitors for charge transfer. The proposed circuit which has a simplified capacitive touch sensor model has been analyzed and simulated by Spectre using Magna EDMOS technology. Looking from the simulation results, the proposed c...
متن کاملCapacitive Sensor Circuit Interface
Capacitive sensing is becoming a popular technology to replace optical detection methods and The FDC1004's basic operation of capacitive sensing implements a switched capacitor circuit to transfer interface.ti.com. Find design resources for Capacitive Sensing. I2C Interface (8) using the AT42QT1060-MMU ('QT1060') 6 Channel QTouchTM Integrated Circuit (IC). Silicon Labs' 8and 32-bit capacitive t...
متن کاملDesign and Construction of a New Capacitive Tactile Sensor for Measuring Normal Tactile Force
This paper presents the design, construction and testing of a new capacitive tactile sensor for measurement of normal tactile force. The operation of proposed sensor has been investigated in ASTABLE and MONOSTABLE circuits. According to the results of these circuits the deviation of ASTABLE circuit results is less than MONOSTABLE circuit results. In addition, the results obtained from ASTABLE c...
متن کاملFlexible Three‐Axial Force Sensor for Soft and Highly Sensitive Artificial Touch
A soft tactile sensor able to detect both normal and tangential forces is fabricated with a simple method using conductive textile. Owing to the multi-layered architecture, the capacitive-based tactile sensor is highly sensitive (less than 10 mg and 8 μm, for minimal detectable weight and displacement, respectively) within a wide normal force range (potentially up to 27 N (400 kPa)) and natural...
متن کاملIntegrating Touch Sensing Software (TSS 3.0.1) on Kinetis L Using GPIO Method
The Touch Sensing Software (TSS) solution transforms a standard Freescale microcontroller into a proximity capacitive touch sensor controller. In TSS 3.0 and higher versions, the touch sense library enables capacitive sensing not only for the entire Freescale S08, ColdFire V1 family and ARM®CortexTM-M4 Kinetis, but also ARM Cortex-M0+ Kinetis L family of microcontrollers. In the TSS 3.0.1 Libra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009